GOST 4543-2016
ГОСТ 4543-2016
|
|
Metal products from structural alloy steel. Specification
Металлопродукция из конструкционной легированной стали. Технические условия
Status: Effective - Supersedes. IUS 6-2017
The standard applies to hot-rolled and forged (with a diameter or thickness up to 250 mm inclusive), metal products of structural alloyed steel calibrated and with special surface finish, used in general-purpose structures, after heat treatment.
Стандарт распространяется на горячекатаную и кованую (диаметром или толщиной до 250 мм включительно), калиброванную и со специальной отделкой поверхности металлопродукцию из конструкционной легированной стали, применяемую в конструкциях общего назначения, после термической обработки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
1/13/2017
SKU: RUSS245919
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.10 Thermoablative steels »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.10 Thermoablative steels »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
As a Replacement Of:
GOST 4543-71: Structural alloyed steel
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 103-2006: Hot-rolled steel strips. Dimensions
GOST 1051-73: Calibrated quality steel
GOST 1133-71: Forged round and square steel. Dimensions
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 14955-77: Quality round steel with a special surface finish
GOST 1497-84: Metals. Methods of tension test
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2216-84: Adjustable smooth snap gauges
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2591-2006: Square hot-rolled steel bars. Dimensions
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 2879-2006: Hexagonal hot-rolled steel bars. Dimensions
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 5378-88: Vernier protractors. Specifications
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5657-69: Steel. Methods for the determination of hardenability
GOST 6507-90: Micrometers. Specifications
GOST 7417-75: Calibrated round steel
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7566-94: Metal products
GOST 8559-75: Square bar steel. Products sizes
GOST 8560-78: Calibrated hexahedral rolled stock
GOST 8817-82: Metals. Upsetting test method
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 54384-2011: Steel. Definition and classification by chemical composition and classes of quality
GOST R ISO 10153-2011: Steel. Determination of boron content. Curcumin spectrophotometric method
GOST R ISO 14284-2009: Steel and iron. Sampling and preparation of samples for determination of chemical composition
GOST R ISO 4967-2009: Steel. Determination of content of non-metallic inclusions. Micrographic method using standard diagrams
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 27834-95: Tool joints for drill pipes. Specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements
GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications
GOST 34183-2017: Оil and oil products trunk pipeline transportation. Oil centrifugal pumps. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications
GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST 34625-2019: Gear lever brake traction rolling stock. General specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 34937-2023: Riveted connections for railway cars. Technical requirements
GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements
GOST 5973-2022: Dumper cars. General specifications
GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53269-2019: Fire fighting equipment. Helmets are fire. General technical requirements. Test methods
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations
GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications
GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications
GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements
GOST R 70085-2022: Bakery products from wheat baking flour. Method for determination of stiffness
GOST R 70532-2022: Cutters with tungsten carbide inserts for machining T-slots. Specifications
GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications
GOST R 70573-2022: Cladding elements, nodes and fastening details of facade hinged ventilated structures. Durability parameters
GOST R 70817-2023: Steel and alloys. Names and basic designations of grades
PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements
PNST 364-2019: Automatic coupling device with automatic coupling sa-3t of freight cars of railways of 1520 mm gauge. Technical conditions
PNST 391-2020: High-strength steel packaging tape. Technical specifications
RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules
SP 494.1325800.2020: Spatial metallic coatings. Design rules
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.