GOST 6507-78
ГОСТ 6507-78
|
|
Micrometers with a division value of 0.01 mm. Specification
Микрометры с ценой деления 0,01 мм. Технические условия
Status: Not effective - Superseded
Mortar batch mixers, cyclical
Миксеры периодического действия, циклические
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS252274
The Product is Contained in the Following Classifiers:
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
The Document is Replaced With:
GOST 6507-90: Micrometers. Specifications
As a Replacement Of:
GOST 6507-60: Micrometers with levers with grade step of 0.01 mm
The Document is Referenced By:
GOST 10377-78: Colorless glass for gas masks and goggles. Specifications
GOST 10667-90: Sheet organic glass. Specifications
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 11103-85: Inorganic glass and glass crystal materials. Method for the determination of thermal stability
GOST 11803-75: Tempered bent glass
GOST 1198-78: Asbestos brake band. Specifications
GOST 12856-84: Asbestos-steel sheets. Specifications
GOST 13.1.107-86: Reprography. Micrography. Microforms of arсhival documents. General specifications
GOST 13073-77: Zinc wire
GOST 13726-78: Aluminium and aluminium alloys strips. Specifications
GOST 13744-87: Fluoroplast-3. Specifications
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 15960-79: Friction flexible asbestos materials and products of them. Specifications
GOST 16475-81: Polyvinylchloride floor tiles. Specifications
GOST 17000-71: Packaging consumer, of polymers, for lubricants. Specification
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1
GOST 17622-72: Industrial organic plastic. Specifications
GOST 17675-80: Electro insulating flexible tubes. General specifications
GOST 1786-88: Friction linings. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.
GOST 18066-72: Laminated glued wood. Method of determining bending ability
GOST 18068-72: Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity
GOST 18351-73: Magnesium alloy extruded rods. Specifications
GOST 18376-79: Fluoroelastomers CKФ-26 and CKФ-32. Specifications
GOST 18846-73: Zinc foil. Specifications
GOST 19246-82: Sheets and slabs from rolled slag-cobalt. Specification
GOST 19441-74: Magnesium-alloy extruded tubes. Specifications
GOST 19609.22-89: Concentrated kaolin. Method for determination of mechanical flexural strength
GOST 2060-73: Brass rods. Specifications
GOST 2112-79: Electromechanical round copper wire. Specification
GOST 21312-75: Modified wood. Method for determination of pressure in swelling
GOST 21313-75: Modified wood. Method for determination of linear swelling
GOST 21488-76: Extruded bars of aluminium and aluminium alloys
GOST 21523.11-79: Modified wood. Method of density determination
GOST 21549-76: Brazing and soldering. Method for determination of parent material erosion
GOST 21836-88: Sight glasses for industrial units. Specifications
GOST 22357-87: Figure skates. General specifications
GOST 22358-87: Racing and hockey skates. General specifications
GOST 23779-79: Asbestos paper. Specifications
GOST 23794-84: Single-acting four-crank closed presses. Norms of accuracy
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 23987-80: Canal excavators. Test methods
GOST 24037-90: Asbestos-polymer seal sheet materials. Method of test for resistance to liquids
GOST 24778-81: Plastics. Methods for shear strength determination in plane of the sheet
GOST 24866-81: Sealed insulating glass units. Specifications
GOST 24866-89: Sealed insulating glass units
GOST 25015-81: Plastics cellular and foam rubber. Method for measuring linear dimensions
GOST 25579-83: Modified wood. Method for determination of dimensions stability
GOST 26406-84: Porcelain and faience ware. Method for determination of bending resistance
GOST 26407-84: Porcelain and faience ware. Method for determination of impact resistance
GOST 26615-85: Enameled winding wires
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 28034-89: Electric insulating varnished fabrics
GOST 3864-75: 22% Mastic. Specifications
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 529-78: Radiator tubes
GOST 5533-79: Figured sheet glass. Specifications
GOST 5727-83: Safe glass for ground transport. Specification
GOST 631-75: Upset drill pipes with couplings
GOST 6507-90: Micrometers. Specifications
GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications
GOST 6799-80: Glass for furniture. Specifications
GOST 7132-78: Glass sheet, thermally polished. Specification
GOST 7481-78: Armoured sheet glass. Technical requirements
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods
GOST 8.493-83: State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification
GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances
GOST 8688-77: Silicate glass, polished. Specification
GOST 9.042-75: Unified corrosion and ageing protection system. Inhibited polymer coatings. Methods of accelerated corrosion test
GOST 9506.1-74: Brushes for electrical machines. The method for determination of sizes
GOST 9626-90: Laminated glued wood. Method for determination of impact viscosity in bending
GOST 9784-75: Organic sheet glass for illuminating engineering. Specifications
GOST 99-89: Cut veneer. Specifications
MI 1233-86: State system for ensuring uniformity of measurements. Measuring Level Transmitters Buoy Sapphire-22-DU
MI 1604-87: Guidelines. GSE. The measures of length are end-plane-parallel. General requirements for calibration procedures
MI 218-80: State system for ensuring uniformity of measurements. Methods of calibration of devices PPM-600
MI 52-75: Calibration procedure for platinum-rhodium thermocouple thermometers, standard, PR 30/6 to 1800 C
MI 612-84: Methodical instructions. Sentry indicators 1ICHT, 2ICHT, 3ICHT. Methods and means of verification
MI 782-85: Guidelines. State system for ensuring uniformity of measurements. Micrometers with a division value of 0.01 mm. Method of verification
MU 34-70-034-83: Guidelines for disassembling, inspecting and measuring the elements of cable samples with impregnated paper insulation for a voltage of 1 - 35 kV
OST 113-03-4001-90: Nickel-chromium catalysts.
R 50-60-88: Recommendations. Unified system of technological documentation. Rules for registration of documents on the technological processes of repair
RST RSFSR 38-87: Paper wire clips. Technical conditions
RTM 16.689.169-75: Explosion-proof and mine electrical equipment repair
TU 13-03-3-86: Plastic Bags for soft furniture items
TU 14-3-1109-82: Seamless cold and heat deformed pipes made of stainless steel
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 301-05-17-89: Fluoroplast-40
TU 3-1002-77: Corrosion-resistant high-strength spring wire
TU 48-19-27-88: Lanthanum tungsten in the form of rods
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.