GOST 9561-2016
ГОСТ 9561-2016
|
|
Reinforced concrete multihollow panels for floors in buildings. Specifications
Плиты перекрытий железобетонные многопустотные для зданий и сооружений. Технические условия
Status: Effective - Supersedes. IUS 4-2017
The standard establishes the basic parameters of the plates, the general technical requirements for them, the general rules for their acceptance, the methods of control and testing, the rules of transportation and storage. The standard applies to reinforced concrete hollow-core slabs made of heavy, light and dense silicate concrete and intended for the bearing part of floors of buildings and structures for various purposes.
Стандарт устанавливает основные параметры плит, общие технические требования к ним, общие правила их приемки, методы контроля и испытаний, правила транспортирования и хранения. Стандарт распространяется на железобетонные многопустотные плиты перекрытий, изготовляемые из тяжелого, легкого и плотного силикатного бетонов и предназначенные для несущей части перекрытий зданий и сооружений различного назначения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/18/2016
SKU: RUSS259043
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
As a Replacement Of:
GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications
The Document References:
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23009-2016: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 28984-2011: Modular coordination of construction dimensions. General.
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
The Document is Referenced By:
GOST R 58875-2020: Green standards. Greened and maintained roofs of buildings and structures. Technical and environmental requirements
R 063-2017: Guidelines. Inspection of objects protected or taken under the protection of units of private security forces of the National Guard of the Russian Federation
R 078-2019: Guidelines. Engineering and technical strength and equipping with technical means of protection of objects and places of residence and storage of property of citizens taken under centralized protection by units of private security of the national guard of the Russian Federation
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
