GOST IEC 61095-2015
ГОСТ IEC 61095-2015
|
|
Electromechanical contactors for household and similar purposes
Контакторы электромеханические бытового и аналогичного назначения
Status: Effective - Introduced for the first time. IUS 12-2016
The standard applies to contactors with an air gap between household and analogous contacts for circuits with a rated voltage of not more than 440 V AC (between phases) and with a rated current of not more than 63 A for an application category
Стандарт распространяется на контакторы с воздушным зазором между контактами бытового и аналогичного назначения для цепей с номинальным напряжением не более 440 В переменного тока (между фазами) и с номинальным током не более 63 А для категории применения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/12/2016
SKU: RUSS260138
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.01 Electrical fittings in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.01 Electrical fittings in general »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 21991-89: Electrotechnical equipment. Standard directions of movement for actuators which control the operation of electrical apparatus
GOST 24622-91: Plastics. Determination of hardness. Rockwell hardness
GOST 27473-87: Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance
GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations
GOST 30011.4.1-96: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST IEC 60695-2-11-2013: Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products
GOST IEC 60947-1-2014: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-5-1-2014: Low-voltage switchgear and controlgear. Part 5-1. Control circuit devices and switching elements. Electromechanical control circuit devices
GOST IEC 61140-2012: Protection against electric shock. Common aspects for installation and equipment
GOST R 50030.4.1-2012: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R IEC 60050-441-2012: Switchgear, control gear and fuses. Chapter 441. Terms and definitions
GOST R IEC 60050-826-2009: Electrical installations. Terms and definitions
GOST R IEC 60068-2-78-2009: Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state
GOST R IEC 60073-2000: Basic and safety principles for man-machine interfase, marking and identification. Coding principles for indication devices and actuators.
GOST R IEC 60085-2011: Electrical insulation. Thermal evaluation and designation
GOST R IEC 60447-2000: Man-machine interface. Actuating principles
GOST R IEC 60664.1-2012: Insulation coordination for equipment within low-voltage systems. Part 1. Principles, requirements and tests
GOST R IEC 60695-2-10-2011: Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedures
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
