imgalt

GOST ISO 3269-2015

ГОСТ ISO 3269-2015

Fasteners. Acceptance inspection

Изделия крепежные. Приемочный контроль

Status: Effective - Introduced for the first time. IUS 1-2017

The standard establishes the procedures for the acceptance inspection of fasteners by the customer to make a decision on acceptance or rejection of a batch of fasteners, if no other control methods have been agreed upon when placing an order

Стандарт устанавливает процедуры проведения приемочного контроля крепежных изделий заказчиком для принятия решения о приемке или браковке партии крепежных изделий, если не были согласованы с поставщиком никакие другие методы контроля при оформлении заказа

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/27/2016

SKU: RUSS260251

Price: $414.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.2 Fasteners »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.01 Fasteners in general »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.01 Fasteners in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G3 Fasteners for general engineering applications » G30 Classification, nomenclature and general rules »


The Document is Replaced With:

GOST ISO 3269-2021: Fasteners and fasteners. Acceptance test

The Document References:

GOST 24997-2004: Gauges for metric thread. Tolerances

GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals

GOST ISO 1478-2015: Tapping screws thread

GOST ISO 2320-2015: Prevailing torque type steel nuts. Mechanical and performance properties

GOST ISO 2702-2015: Heat-treated steel tapping screws. Mechanical properties

GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs

GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts

GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress

GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C

GOST ISO 4759-3-2015: Fasteners. Tolerances. Part 3. Washers, flat for bolts, screws and nuts. Product grades A and C

GOST ISO 6157-1-2015: Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements

GOST ISO 6157-2-2015: Fasteners. Surface discontinuities. Part 2. Nuts

GOST ISO 6157-3-2014: Fasteners. Defects of surface. Part 3. Bolts, screws and studs, special

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch

GOST R ISO 10683-2013: Fasteners. Non-electrolytically zinc flake coatings

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

The Document is Referenced By:

GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST ISO 10511-2016: Prevailing torque type hexagon thin nuts (with non-metallic insert)

GOST ISO 10512-2016: Prevailing torque type hexagon nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10

GOST ISO 10513-2016: Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12

GOST ISO 12126-2016: Prevailing torque type all-metall hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B

GOST ISO 14579-2015: Bolts with cylindrical head and star-type internal socket button

GOST ISO 14583-2015: Screws with rounded head and star-shaped recession for wrench

GOST ISO 16426-2015: Fasteners. Quality assurance system

GOST ISO 21670-2015: Fasteners. Nuts hexahedral welded with flange

GOST ISO 4042-2015: Fasteners. Electroplated coatings

GOST ISO 6157-2-2015: Fasteners. Surface discontinuities. Part 2. Nuts

GOST ISO 7042-2016: Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12

GOST ISO 7044-2016: Prevailing torque type all-metall hexagon nuts with flange, style 2. Product grades A and B

GOST ISO 7092-2016: Plain washers. Small series. Product grade A

GOST ISO 7093-1-2016: Plain washers. Large series. Part 1. Product grade A

GOST ISO 7093-2-2016: Plain washers. Large series. Part 2. Product grade C

GOST ISO 8992-2015: Fasteners. General requirements for bolts, screws, studs and nuts

GOST R 52854-2020: Automotive vehicles. Star head bolts with small flange

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58799-2020: Automotive vehicles. Hexagonal weld nuts

GOST R ISO 15977-2017: Open end blind rivets with break pull mandrel and protruding head (aluminium alloy body and a steel mandrel)

GOST R ISO 15978-2017: Open end blind rivets with break pull mandrel and countersunk head (aluminium alloy body and a steel mandrel)

GOST R ISO 15979-2017: Open end blind rivets with break pull mandrel and protruding head (steel body and steel mandrel)

GOST R ISO 15980-2017: Open end blind rivets with break pull mandrel and countersunk head (steel body and steel mandrel)

GOST R ISO 15981-2017: Open end blind rivets with break pull mandrel and protruding head (aluminium alloy body and aluminium alloy mandrel)

GOST R ISO 15982-2017: Open end blind rivets with break pull mandrel and countersunk head (aluminium alloy body and aluminium alloy mandrel)

Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English
Price: $134.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!