FR 1.31.2010.07605
ФР 1.31.2010.07605
|
|
Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of acetic acid in industrial emissions into the atmosphere by the photometric method with ammonium vanadate
Количественный химический анализ атмосферного воздуха и выбросов в атмосферу. Методика измерений массовой концентрации уксусной кислоты в промышленных выбросах в атмосферу фотометрическим методом с ванадатом аммония
Status: Effective. Certificate of certification of measurement methodology No. 223.1.02.03.55
The document establishes a method for measuring the mass concentration of acetic acid in industrial emissions into the atmosphere by the photometric method with ammonium vanadate. The measurement range of the mass concentration of acetic acid is from 4.0 to 50 mg
Документ устанавливает методику измерений массовой концентрации уксусной кислоты в промышленных выбросах в атмосферу фотометрическим методом с ванадатом аммония. Диапазон измерений массовой концентрации уксусной кислоты от 4,0 до 50 мг/м3.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal State Institution Federal Center for Analysis and Assessment of Technogenic Impact,
6/15/2010
SKU: RUSS273854
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Ministry of Environmental Protection and Natural Resources of Russian Federation »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
V Social Security »
1 Requirements of sanitary and epidemiological regulation »
1.1 General requirements of sanitary-epidemiological regulation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.3 Requirements for quality of atmospheric air of industrial facilities and industries »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.2 Requirements for air quality in populated areas »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.1 Hygienic regulation of microclimate parameters and content of harmful substances in air of working area »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.01 Air quality in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.40 Emissions of stationary sources »
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 19034-82: Tubes of polyvinylchloride plastic. Specifications
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 29224-91: Liquid-in-glass laboratory thermometers. Principles of design, construction and use
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 6709-72: Distilled water. Specifications
GOST 7328-2001: Weights. General specifications
GOST 9336-75: Reagents. Ammonium metavanadate. Specifications
GOST 9932-75: Glass laboratory flow meters
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
POT R M-004-97: Intersectoral labor protection regulations for the use of chemicals
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
