GOST 14959-2016

ГОСТ 14959-2016

Spring nonalloy and alloy steel product. Specifications

Металлопродукция из рессорно-пружинной нелегированной и легированной стали. Технические условия

Status: Effective - Supersedes. IUS 7-2017

This standard applies to hot-rolled and forged metal products with a diameter or thickness up to 270 mm inclusive, as well as calibrated and with special surface finish, intended for the manufacture of springs, springs and other machine parts used in the hardened and tempered condition.

Настоящий стандарт распространяется на металлопродукцию горячекатаную и кованую диаметром или толщиной до 270 мм включительно, а также калиброванную и со специальной отделкой поверхности, предназначенную для изготовления пружин, рессор и других деталей машин и механизмов, применяемых в закаленном и отпущенном состоянии

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: Federal Agency for Technical Regulation and Metrology, 3/10/2017

SKU: RUSS286276

Price: $219.78




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.25 Spring steel »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.25 Spring steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V22 Rolled and shaped steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


As a Replacement Of:

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 103-2006: Hot-rolled steel strips. Dimensions

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1051-73: Calibrated quality steel

GOST 1133-71: Forged round and square steel. Dimensions

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 162-90: Depth gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2216-84: Adjustable smooth snap gauges

GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 2591-2006: Square hot-rolled steel bars. Dimensions

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2879-2006: Hexagonal hot-rolled steel bars. Dimensions

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 5378-88: Vernier protractors. Specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5657-69: Steel. Methods for the determination of hardenability

GOST 6507-90: Micrometers. Specifications

GOST 7417-75: Calibrated round steel

GOST 7419-90: Hot-rolled tool steel for springs

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8233-56: Steel. Microstructure standards

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54384-2011: Steel. Definition and classification by chemical composition and classes of quality

GOST R ISO 10153-2011: Steel. Determination of boron content. Curcumin spectrophotometric method

GOST R ISO 4940-2010: Steel and iron. Determination of nickel content. Flame atomic absorption spectrometric method

GOST R ISO 4943-2010: Steel and iron. Determination of copper content. Flame atomic absorption spectrometric method

The Document is Referenced By:

GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications

GOST 32205-2013: Springs of spring suspensions of railway rolling stock. Scale of microstructure standards

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34628-2019: Springs and spring suspension kits for railway rolling stock. Strength calculation methods for longitudinal and combined loads

GOST 34636-2020: Pipe billet. General specifications

GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications

PNST 391-2020: High-strength steel packaging tape. Technical specifications

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!