GOST 31174-2017
ГОСТ 31174-2017
|
|
Gates of metall. General specifications
Ворота металлические. Общие технические условия
Status: Effective - Supersedes. IUS 2-2018
This standard applies to metal doors (door systems) with canvases based on metal structures filled with various materials, including curtain-type canvases, installed in wall openings of buildings and structures for various purposes, including garages, as well as door structures used in systems outdoor fencing. The scope is established depending on the operating conditions in accordance with the applicable building codes and regulations, taking into account the requirements of this standard. Requirements for specific types of structures should be set out in the standards for a specific type of gate or in the manufacturer's specifications. This standard does not apply to lift and sluice gates, special purpose gates in terms of additional fire safety requirements, as well as to the mechanisms of automatic gate drive. This standard can be applied for certification purposes.
Настоящий стандарт распространяется на металлические ворота (воротные системы) с полотнами на основе металлических конструкций, заполненных различными материалами, включая полотна шторного типа, устанавливаемые в стеновые проемы зданий и сооружений различного назначения, в том числе гаражей, а также на конструкции ворот, используемые в системах ограждений на открытых площадках. Область применения устанавливают в зависимости от условий эксплуатации в соответствии с действующими строительными нормами и правилами с учетом требований настоящего стандарта. Требования к конкретным типам конструкций должны быть изложены в стандартах на определенный тип ворот или в ТУ предприятия-изготовителя. Настоящий стандарт не распространяется на лифтовые и шлюзовые ворота, ворота специального назначения в части дополнительных требований к пожаробезопасности, а также на механизмы автоматического привода ворот. Настоящий стандарт может быть применен для целей сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/12/2017
SKU: RUSS286487
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
As a Replacement Of:
GOST 31174-2003: Gates of metall. General specifications
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10354-82: Polyethylene film Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 14192-96: Cargo marking
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 166-89: Vernier callipers. Specifications
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 23486-79: Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24866-2014: Insulating glass units. Specifications
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26602.5-2001: Windows and doors. Methods of determination of resistance to wind load
GOST 29151-91: RVC-coated tarpaulins for automobile transport. General specifications
GOST 30698-2014: Tempered glass. Specifications.
GOST 30778-2001: Rubber compression-types for windows and doors. Specifications
GOST 30826-2014: Glass laminated. Specifications.
GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications
GOST 31149-2014: Paint and varnish materials. Determination of adhesion by the method of cross-cut
GOST 31173-2016: Steel doors. Specifications
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 5088-2005: Hinges for windows and doors. Specifications
GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8242-88: Profiled details from wood and wood materials for building. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8925-68: Flat clearance gauges for machine retaining devices. Design
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50862-2012: Safes, safe rooms and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
SP 131.13330.2012: Building climatology
SP 20.13330.2011: Loads and impacts
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
Technical regulations of the Customs Union TR TS 004/2011: About the safety of low voltage equipment
The Document is Referenced By:
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
