GOST 31384-2017
ГОСТ 31384-2017
|
|
Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
Защита бетонных и железобетонных конструкций от коррозии. Общие технические требования
Status: Effective - Supersedes. IUS 2-2018
This standard establishes the requirements taken into account in the design of corrosion protection of concrete and reinforced concrete structures in buildings and structures, both newly built and reconstructed, intended for use in aggressive environments with temperatures ranging from minus 70 ° C to plus 50 ° C. This standard defines technical requirements for corrosion protection of concrete and reinforced concrete structures for a service life of 50 years. For concrete and reinforced concrete structures with a service life of 100 years and structures of buildings and structures of class KS-3, having an increased level of responsibility according to GOST 27751, the assessment of the degree of aggressiveness increases by one level. If the assessment of the degree of aggressiveness of the environment cannot be increased (for example, for a highly aggressive environment), corrosion protection is carried out according to a special project. The design of the reconstruction of buildings and structures should include an analysis of the corrosion state of structures and protective coatings, taking into account the type and degree of aggressiveness of the environment in the new operating conditions. The requirements of this standard should be taken into account when developing other regulatory documents, as well as the technical conditions according to which specific types of structures are manufactured or erected, for which they establish standardized quality indicators providing technological and technical efficiency, as well as in the development of technological and design documentation for these structures. The requirements of this standard do not apply to the design of protection of concrete and reinforced concrete structures from corrosion caused by radioactive substances, as well as the design of structures made of special concrete (polymer concrete, concrete polymer, acidic, heat-resistant concrete, etc.)
Настоящий стандарт устанавливает требования, учитываемые при проектировании защиты от коррозии бетонных и железобетонных конструкций в зданиях и сооружениях, как вновь возводимых, так и реконструируемых, предназначенных для эксплуатации в агрессивных средах с температурой от минус 70 °С до плюс 50 °С. В настоящем cтандарте определены технические требования к защите от коррозии бетонных и железобетонных конструкций для срока эксплуатации 50 лет. Для бетонных и железобетонных конструкций со сроком эксплуатации 100 лет и конструкций зданий и сооружений класса КС-3, имеющих повышенный уровень ответственности по ГОСТ 27751, оценка степени агрессивности повышается на один уровень. Если оценка степени агрессивности среды не может быть увеличена (например, для сильноагрессивной среды), защита от коррозии выполняется по специальному проекту. Проектирование реконструкции зданий и сооружений должно предусматривать анализ коррозионного состояния конструкций и защитных покрытий с учетом вида и степени агрессивности среды в новых условиях эксплуатации. Требования настоящего стандарта следует учитывать при разработке других нормативных документов, а также технических условий, по которым изготовляются или возводятся конструкции конкретных видов, для которых устанавливают нормируемые показатели качества, обеспечивающие технологическую и техническую эффективность, а также при разработке технологической и проектной документации на данные конструкции. Требования настоящего стандарта не распространяются на проектирование защиты бетонных и железобетонных конструкций от коррозии, вызываемой радиоактивными веществами, а также на проектирование конструкций из специальных бетонов (полимербетонов, бетонополимеров, кислото-, жаростойких бетонов и т. п.)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/5/2017
SKU: RUSS286495
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
As a Replacement Of:
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
The Document References:
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.3.005-75: Painting works
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30515-2013: Cements. General specifications
GOST 31108-2016: General structural Portland clinker cements. Specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications
GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32496-2013: Fillers porous for light concrete. Specifications
GOST 33290-2015: Paint materials used in building. General specifications
GOST 4245-72: Drinking water. Method for determination of chloride content
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8736-2014: Sand for construction works. Specifications
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 969-91: Alumina and high alumina cements. Specifications
GOST R 56592-2015: Mineral Admixtures for Concretes and mortars. General specifications
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 56727-2015: Self-stressing cements. Specifications
GOST R ISO 14040-2010: Environmental management. Life cycle assessment. Principles and framework
GOST R ISO 14041-2000: Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis
GOST R ISO 14042-2001: Environmental management. Life cycle assessment. Life cycle impact assessment
GOST R ISO 14043-2001: Environmental management. Life cycle assessment. Life cycle interpretation
GOST R ISO 14044-2007: Environmental management. Life cycle assessment. Requirements and guidelines
GOST R ISO 14045-2014: Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SP 121.13330.2012: Aerodromes
SP 128.13330.2016: Aluminium structures
SP 131.13330.2012: Building climatology
SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
The Document is Referenced By:
GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters
GOST 25214-2021: Dense silicate concrete. Technical specifications
GOST 25592-2019: Ashes and slag mixtures of thermal power plants for concrete. Technical conditions
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 35054-2023: Main pipeline transportation of oil and oil products. Buildings and structures. Design rules
GOST R 57190-2016: Grounding conductors and grounding devices different purposes. Terms and definitions
GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications
GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions
GOST R 58411-2019: Flexible concrete slabs. Technical specifications
GOST R 58895-2020: Concrete is chemically resistant. Specifications
GOST R 58896-2020: Concrete is chemically resistant. Test methods
GOST R 70222-2022: Heavy concretes. Technical conditions
GOST R 70306-2022: Centrifuged reinforced concrete columns of circular section for industrial buildings and engineering structures. Technical specifications
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements
RB 155-20: Safety Guide for the Use of Atomic Energy "Recommendations on the Procedure, Volume, Methods and Means of Control of Radioactive Waste to Confirm its Compliance with the Acceptance Criteria for Disposal"
SP 109.13330.2012: Cold storage units
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules
SP 43.13330.2012: Structures for industrial installations
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 81.13330.2017: The reclamation systems and construction
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
