GOST 33735-2016
ГОСТ 33735-2016
|
|
Agricultural machinery. Grain-cleaning machines. Test methods
Техника сельскохозяйственная. Машины зерноочистительные. Методы испытаний
Status: Effective - Introduced for the first time. IUS 8-2017
This standard applies to grain cleaning machines and aggregates, grain cleaning and drying complexes, seed cleaning attachments and seed cleaning machines for cleaning grain, leguminous, industrial, oilseeds, grass seeds, vegetables and other crops and establishes test methods for the above types of machines
Настоящий стандарт распространяется на зерноочистительные машины и агрегаты, зерноочистительно-сушильные комплексы, семяочистительные приставки и семяочистительные машины для очистки зерновых, зернобобовых, технических, масличных культур, семян трав, овощных и других культур и устанавливает методы испытаний вышеперечисленных типов машин
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/22/2017
SKU: RUSS286547
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.2 Machines and equipment for agriculture and forestry »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
National standards »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.01 Agricultural machinery and equipment in general »
National standards »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.01 Agricultural machinery and equipment in general »
The Document References:
GOST 10840-64: Grain. Methods of determination of the hectolitre weight
GOST 10842-89: Cereals, pulses and oilseeds. Method for determination of 1000 kernels or seeds weight
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.019-2005: Occupational safety standards system. Agricultural tractors and self-propelled machines. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12036-85: Seeds of farm crops. Acceptance rules and methods of sampling
GOST 12037-81: Seed of farm crops. Methods for determination of purity and seed lot impurity
GOST 12038-84: Agricultural seeds. Methods for determination of germination
GOST 12041-82: Seed of farm crops. Method for determination of moisture content
GOST 12042-80: Seed of farm crops. Methods of determination of 1000 seed weight
GOST 13586.3-2015: Grain. Acceptance rules and sampling methods
GOST 13586.3-83: Grain. Acceptance rules and sampling methods
GOST 13586.5-2015: Grain. Method of moisture content determination
GOST 13586.5-93: Grain. Method of moisture content determination
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 20081-74: Seed production process of crop plants. Basic notions. Terms and definitions
GOST 20290-74: Seeds of crops. Determination of seed sowing quality. Terms and definitions
GOST 21623-76: System of technical maintenance and repair of equipment. Characteristics for evaluation of maintainability and rapairability. Terms and definitions
GOST 22617.0-77: Seeds of sugar beet. Acceptance rules and methods of sampling
GOST 22617.1-77: Seeds of sugar beet. Methods for determination of purity, seed lot impurity, size uniformity, monospermuity
GOST 22617.2-94: Sugar beet seeds. Methods for determination of seed germination, monogermity and quality
GOST 22617.3-77: Seeds of sugar beet. Method for determination of moisture
GOST 22617.4-91: Beet seeds. Methods for determinations of 1000 seeds mass and one sowing unit mass
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24055-2016: Agricultural machinery. Methods of operational-technological evaluation
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 26025-83: Agricultural and forestry machines and tractors. Measuring methods of constructive parameters
GOST 26026-83: Agricultural and forestry machines and tractors. Evaluation methods of fitness to technical servicing
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27388-87: Documents for operation and maintenance of agricultural technique
GOST 28305-89: Agricultural and forestry machines and tractors. Acceptance rules for testing
GOST 30025-93: Seeds of essential oil crops. Method for determination of purity and seed lot impurity
GOST 30483-97: Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles
GOST 6376-74: Hand anemometer accounting device. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST ISO 520-2014: Cereals and pulses. Determination of the mass of 1000 grains
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 54783-2011: Testing of agricultural machinery. Basic principles
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.