GOST 34028-2016
ГОСТ 34028-2016
|
|
Reinforcing rolled products for reinforced concrete constructions. Specifications
Прокат арматурный для железобетонных конструкций. Технические условия
Status: Effective - Supersedes. IUS 8-2017; the date of introduction was postponed from 01/01/2018 to 01/01/2019 (order of Rosstandart 2100-st dated 12/26/2017); IUS 3-2018
This standard applies to reinforcing bars of smooth and periodic profiles of classes A240, A400, A500 and A600, intended for use in the reinforcement of precast concrete structures and in the construction of monolithic reinforced concrete, as well as on reinforcing bars of a periodic profile of classes Ap600, A800 and A1000, intended for use when reinforcing prestressed reinforced concrete structures. Reinforcing steel is made from unalloyed and alloyed steel. This standard establishes standard technical requirements for rebar, as well as an additional set of technical requirements depending on its purpose.
Настоящий стандарт распространяется на арматурный прокат гладкого и периодического профилей классов А240, А400, А500 и А600, предназначенный для применения при армировании сборных железобетонных конструкций и при возведении монолитного железобетона, а также на арматурный прокат периодического профиля классов Ап600, А800 и А1000, предназначенный для применения при армировании предварительно напряженных железобетонных конструкций. Арматурный прокат изготовляют из нелегированной и легированной стали. Настоящий стандарт устанавливает стандартные технические требования к арматурному прокату, а также дополнительный набор технических требований в зависимости от его назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/31/2017
SKU: RUSS286638
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Assembly devices »
Welding regulations »
Main materials »
Steel, cast iron »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.15 Steel for reinforcement of concrete »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.15 Steel for reinforcement of concrete »
As a Replacement Of:
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
The Document References:
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 12026-76: Filter paper for laboratory application
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 14019-2003: Metallic materials. Bend test method
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22867-77: Reagents. Ammonium nitrate. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals
GOST 2603-79: Reagents. Acetone. Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 4142-77: Reagents. Calcium nitrate tetrahydrate. Specifications
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7566-94: Metal products
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST R 51999-2002: Technical rectified and denatured synthetic ethyl alcohol. Specifications
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
The Document is Referenced By:
GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications
GOST 13579-2018: Сoncrete blocks for walls of basements. Specifications
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules
GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications
GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 34278-2017: Mechanical reinforcement couplers for reinforced concrete structures. Specifications
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 9574-2018: Gypsum сoncrete panels for partitions. Specifications
GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications
GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
GOST R 70364-2022: Public roads. Concretes for construction of base layers and pavements. Rules of manufacture of works
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70520-2022: Reinforcement for reinforced concrete structures. Methods for determining the mechanical properties at high temperatures
GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions
Order 1004-st: On amendments to the order of the Federal Agency for Technical Regulation and Metrology of March 31, 2017 No. 232-st “On the Implementation of the Interstate Standard” and the restoration of the interstate standard
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
PNST 558-2022: Thermo-mechanically hardened special purpose rolled steel of Ас600С class for reinforcement of reinforced concrete structures. Technical specifications
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 468.1325800.2019: Concrete and reinforced concrete structures. Rules for ensuring fire resistance and fire safety
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.