GOST 34069-2017
ГОСТ 34069-2017
|
|
Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing
Система газоснабжения. Магистральная трубопроводная транспортировка газа. Мобильная компрессорная станция. Контроль и испытания
Status: Effective - Introduced for the first time. IUS 8-2017
This standard establishes the requirements for the control and testing of mobile compressor stations designed to transfer natural gas to existing gas pipelines from the sections of trunk gas pipelines that are taken out of operation, as well as to transfer natural gas from the section of the gas pipeline to the adjacent section of this gas pipeline separated by a crane unit. This standard applies to mobile compressor stations for pumping natural gas with a final overpressure of 5.5 to 11.8 MPa.
Настоящий стандарт устанавливает требования к контролю и испытаниям мобильных компрессорных станций, предназначенных для перекачки природного газа в действующие газопроводы из участков магистральных газопроводов, выводимых из работы, а также для перекачки природного газа из участка магистрального газопровода в смежный участок данного газопровода, отделенный крановым узлом. Настоящий стандарт распространяется на мобильные компрессорные станции для перекачки природного газа с конечным избыточным давлением от 5,5 до 11,8 МПа
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/31/2017
SKU: RUSS286663
The Product is Contained in the Following Classifiers:
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
The Document References:
GOST 10136-77: Diethyleneglycol. Specifications
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.046-2014: Occupational safety standards system. Building. Lighting of building sites
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17187-2010: Noise meters Part 1 Technical requirements
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 19710-83: Ethylene glycol. Specifications
GOST 21339-82: Tachometers
GOST 2222-95: Technical methanol. Specifications
GOST 22748-77: Motor vehicles. List of outside dimensions. Methods of measuring
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST 24940-96: Buildings and structures. Methods of measuring luminance
GOST 26824-2010: Buildings and structures. Methods for measuring the luminance
GOST 28563-90: General-purpose mobile compressor station. Methods of testing
GOST 28567-90: Compressors. Terms and definitions
GOST 29329-92: Balance for static weightings
GOST 30319.1-96: Natural gas. Methods for the evaluation of physical properties
GOST 30319.2-96: Natural gas. Methods of calculation of physical properties
GOST 30319.3-96: Natural gas. Methods of calculation of physical properties. Definition of physical properties by equation of state
GOST 31192.1-2004: Vibration. Measurement and evaluation of human exposure to hand-transmitted vibration. Part 1. General requirеments
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace
GOST 31967-2012: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.023-2014: State system for ensuring the uniformity of measurements. State verification schedule for means measuring continuous and pulse luminous radiation parameters
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST ISO 8178-1-2013: Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions
GOST ISO 8178-2-2013: Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 54944-2012: Buildings and structures. Methods for mеаsurement the illuminance
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
SP 52.13330.2011: Natural and artificial lighting
The Document is Referenced By:
Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
