imgalt

GOST 34283-2017

ГОСТ 34283-2017

Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads

Сосуды и аппараты. Нормы и методы расчета на прочность при ветровых, сейсмических и других внешних нагрузках

Status: Effective - Introduced for the first time. IUS 3-2018

This standard applies to vessels and apparatus used in the chemical, petrochemical, oil refining and other industries, and contains requirements for performing strength analysis under wind, seismic and other external loads. This standard establishes methods for determining the design effort in the elements of vessels and devices from wind loads, seismic effects and other external loads, a list of calculations that must be performed to confirm the strength and stability of vessels and devices under the action of these loads. This standard applies to stand-alone vessels and apparatus that do not affect each other. This standard is used in conjunction with GOST 34233.1-GOST 34233.10 and GOST 34347

Настоящий стандарт распространяется на сосуды и аппараты, применяемые в химической, нефтехимической, нефтеперерабатывающей и других отраслях промышленности, и содержит требования к выполнению расчета на прочность при ветровых, сейсмических и других внешних нагрузках. Настоящий стандарт устанавливает методы определения расчетных усилий в элементах сосудов и аппаратов от ветровых нагрузок, сейсмических воздействий и других внешних нагрузок, перечень расчетов, которые необходимо выполнить для подтверждения прочности и устойчивости сосудов и аппаратов при действии этих нагрузок. Настоящий стандарт распространяется на отдельно стоящие сосуды и аппараты, не оказывающие влияния друг на друга. Настоящий стандарт применяется совместно с ГОСТ 34233.1-ГОСТ 34233.10 и ГОСТ 34347

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/14/2017

SKU: RUSS286850

Price: $311.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.9 Equipment for centrifugal and gravity separation of liquid and non-uniform systems »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.4 Thermal and electrothermal equipment »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry »

National standards » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 75.200.01 Transportation and storage in general »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 75.200.01 Transportation and storage in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G0 General rules and regulations for engineering » G02 Norms of calculation and design »


The Document References:

GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications

GOST 34233.10-2017: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus working with hydrogen sulfide media

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers

GOST 34233.3-2017: Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34233.5-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads

GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads

GOST 34233.7-2017: Vessels and apparatus. Norms and methods of strength calculation. Heat exchangers

GOST 34233.8-2017: Vessels and apparatus. Norms and methods of strength calculation. Shirts and apparatus

GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST ISO 13706-2011: Air-cooled apparatus. General technical requirements

ND 2-090201-008: Rules for the technical supervision of the manufacture of containers

The Document is Referenced By:

Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and

GOST 17032-2022: Horizontal steel tanks for petroleum products. Specifications

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34233.5-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads

GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English
Price: $240.00
imgalt
Main-line diesel locomotives. General technical requirements.
Language: English
Price: $514.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English
Price: $254.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English
Price: $386.00
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English
Price: $542.00
imgalt
Locomotives. Requirements for strength and dynamic qualities
Language: English
Price: $808.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!