GOST 34329-2017
ГОСТ 34329-2017
|
|
Formworks. General specifications
Опалубка. Общие технические условия
Status: Effective - Introduced for the first time. IUS 3-2018
This standard applies to all types of formwork for the construction of monolithic concrete and reinforced concrete structures. Standards for specific types of formwork and individual elements are being developed additionally.
Настоящий стандарт распространяется на опалубку всех типов для возведения монолитных бетонных и железобетонных конструкций. Стандарты конкретных типов опалубок и отдельных элементов разрабатываются дополнительно
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/14/2017
SKU: RUSS286874
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
7. Normative documents for mobile buildings and structures, equipment, inventory and tools »
K.71 Equipment of construction organizations »
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 10632-2014: Wood particle boards. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 11474-76: Bent-steel sections. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11539-2014: Bakelized plywood. Specifications
GOST 13118-83: Guide posts smooth for cold plastic working dies. Construction and dimensions
GOST 13268-88: Tubular electric heaters
GOST 14192-96: Cargo marking
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 20850-2014: Wooden glued load bearing structures. General specifications
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 380-2005: Common quality carbon steel. Grades
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use
GOST 3916.2-96: General purpose plywood with coniferous veneer
GOST 4.221-82: Quality ratings system. Bulding. Aluminium structures. Nomenclature of characteristics
GOST 4598-86: Fibre boards. Specifications
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9463-2016: Round timber of coniferous species. Specification
GOST 977-88: Steel castings. General specifications
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 52752-2007: Formworks. Test methods
SNiP 12-03-2001: Labor safety in construction industry
SNiP II-25-80: Wood constructions
SP 20.13330.2016: Loads and actions
SP 64.13330.2011: Wooden structures.
The Document is Referenced By:
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
SP 414.1325800.2018: Fixed formwork. Design rules
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.