GOST 34347-2017

ГОСТ 34347-2017

Steel welded vessels and apparatus. General technical conditions

Сосуды и аппараты стальные сварные. Общие технические условия

Status: Effective - Introduced for the first time. IUS 3-2018

The standard applies to steel welded vessels and devices operating under pressure, vacuum with a residual pressure of not less than 665 Pa (5 mmHg) or without pressure (for filling), intended for use in process plants of chemical, petrochemical, refining gas processing, oil, gas and other industries and calculated on the strength according to GOST 34233.1-34233.12, GOST 34283. The standard establishes the main technical requirements for the design, materials, manufacturing (before NIJ), test methods, acceptance and delivery, reconstruction, repair, installation vessels and equipment.

Стандарт распространяется на стальные сварные сосуды и аппараты, работающие под избыточным давлением, вакуумом с остаточным давлением не ниже 665 Па (5 мм рт. ст.) или без давления (под налив), предназначенные для применения в технологических установках химической, нефтехимической, нефтеперерабатывающей, газоперерабатывающей, нефтяной, газовой и других отраслях промышленности и рассчитываемые на прочность по ГОСТ 34233.1-34233.12, ГОСТ 34283. Стандарт устанавливает основные технические требования к конструкции, материалам, изготовлению (доизготовлению), методам испытаний, приемке и поставке, реконструкции, ремонту, монтажу сосудов и аппаратов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 112

Approved: Federal Agency for Technical Regulation and Metrology, 12/14/2017

SKU: PROC231009

Price: $836.60

English keywords: vessels; vehicles; hydrotest; test pressure; strength; pipes; steel and alloy grades; wall temperature

Russian keywords: оборудование для химической промышленности75;200 оборудование для переработки нефти; нефтяных продуктов и природного газа


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

Welding regulations » Metal structures »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.9 Equipment for centrifugal and gravity separation of liquid and non-uniform systems »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry »

National standards » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G40 Classification, nomenclature and general rules »


The Document References:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12622-78: Flat heads witch knuckle. General dimensions

GOST 12623-78: Flat neads without knuckle. General dimensions

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14192-96: Cargo marking

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1525-2015: Rods of monel. Specifications

GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1

GOST 17232-99: Aluminium and aluminium alloys plates. Specifications

GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements

GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 18661-73: Steel. Method for measurement of hardness by shock indentation

GOST 19281-2014: High strength rolled steel. General specification

GOST 19903-2015: Hot-rolled sheet. Range

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts

GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions

GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions

GOST 26179-84: Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm

GOST 26828-86: Instrumentation and machine building products. Marking

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30753-2001: Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 3242-79: Welded joints

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 34233.10-2017: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus working with hydrogen sulfide media

GOST 34233.11-2017: Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34233.12-2017: Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer

GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers

GOST 34233.3-2017: Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34233.5-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads

GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads

GOST 34233.7-2017: Vessels and apparatus. Norms and methods of strength calculation. Heat exchangers

GOST 34233.8-2017: Vessels and apparatus. Norms and methods of strength calculation. Shirts and apparatus

GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus

GOST 34283-2017: Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 380-2005: Common quality carbon steel. Grades

GOST 3836-83: Unalloyed thin sheet and band steel for electric engineering purposes

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades

GOST 494-2014: Brass tubes. Specifications

GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications

GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6533-78: Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9617-76: Vessels and apparatus. Series of diameters.

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread

GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts

GOST R ISO 9934-1-2011: Non-destructive testing. Magnetic particle testing. Part 1. General principles

GOST R ISO 9934-2-2011: Non-destructive testing. Magnetic particle testing. Part 2. Detection media

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 26.260.14-2001: Pressure-operated vessels and devices. Leak check techniques.

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

RD 24.200.11-90: Pressure-operated vessels and devices. Safety rules and standards during hydro-proof and leak-proof testing operations.

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 26-11-08-86: Welded Joints. Mechanical Tests

SP 131.13330.2012: Building climatology

SP 16.13330.2017: Steel structures

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions

GOST 977-88: Steel castings. General specifications

The Document is Referenced By:

GOST 34233.10-2017: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus working with hydrogen sulfide media

GOST 34233.11-2017: Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus

GOST 34283-2017: Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

Customers Who Viewed This Item Also Viewed:

Concretes. Methods for determination of water tightness
Language: English
Price: $52.64
Rotating electrical machines
Language: English
Price: $206.80
Specification for plastic process pipeline design
Language: English
Price: $560.24
Nondestructive testing. Welded joints. Ultrasonic methods
Language: English
Price: $134.42
Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
Language: English
Price: $14.10
Concretes. Methods of determination of density
Language: English
Price: $28.20
Concretes. Method of determination of moisture content
Language: English
Price: $14.10
Concretes. Method of determination of water absorption
Language: English
Price: $18.80
Concretes. Methods of determination of porosity parameters
Language: English
Price: $23.50
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Construction projects reliability and safety assurance system. Loads and impacts. Design norms.
Language: English
Price: $98.48
Loads and impacts
Language: English
Price: $338.40
Electrical trains. General technical requirements.
Language: English
Price: $249.10
Certification procedure for railway transport technical means
Language: English
Price: $560.24
Operation manual of civil airdromes of the Russian Federation
Language: English
Price: $793.14
Food products. Methods for determination quantity of mesophilic aerobes and facultative anaerobes
Language: English
Price: $18.80
Safety of machinery. Requirements for justification of safety
Language: English
Price: $135.36
Oil. General specifications.
Language: English
Price: $112.80
Steel. Method of photoelectric spectral analysis
Language: English
Price: $70.50
Flange connections of wellhead equipment. Types, basic parameters and dimensions
Language: English
Price: $61.10

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!