imgalt

GOST IEC 60974-10-2017

ГОСТ IEC 60974-10-2017

Arс welding equipment. Part 10. Electromagnetic compatibility (EMC) requirements

Оборудование для дуговой сварки. Часть 10. Требования электромагнитной совместимости (ЭМС)

Status: Effective - Introduced for the first time. IUS 3-2018

This standard establishes: a) the applicability of standards and test methods for radiofrequency electromagnetic emissions, b) the applicability of standards and test methods for the emission of harmonic components of current, voltage fluctuations and flicker, c) noise immunity requirements and test methods for continuous and transient conducted and radiated disturbances, including electrostatic discharge. This standard applies to equipment intended for arc welding and related processes, including power supplies and ancillary equipment, such as welding wire feed mechanisms, liquid cooling systems, ignition devices and arc stabilization.

Настоящий стандарт устанавливает: a) применяемость стандартов и методов испытаний для радиочастотной электромагнитной эмиссии, b) применяемость стандартов и методов испытаний для эмиссии гармонических составляющих тока, колебаний напряжения и фликера, c) требования помехоустойчивости и методы испытаний для непрерывных и переходных кондуктивных и излучаемых помех, включая электростатические разряды. Настоящий стандарт распространяется на оборудование, предназначенное для дуговой сварки и родственных процессов, включая источники питания и вспомогательное оборудование, например, механизмы подачи сварочной проволоки, жидкостные системы охлаждения, устройства зажигания и стабилизации дуги

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/14/2017

SKU: RUSS287122

Price: $542.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Defects »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.12 Equipment for production of electrical products and materials and electro-physical processing of materials »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.01 Welding, brazing and soldering in general »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.01 Welding, brazing and soldering in general »


The Document References:

GOST 30804.3.11-2013: Electromagnetic compatibility of technical equipment. Voltage fluctuation and flicker caused by equipment with rated current min/= 75 A (per phase) connected to low-voltage supply systems under certain conditions. Limits and test methods

GOST 30804.4.11-2013: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods

GOST 30804.4.2-2013: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods

GOST CISPR 16-1-1-2016: Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring equipment

GOST CISPR 16-1-2-2016: Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus. Communication devices for conductive interference measurements

GOST IEC 61000-3-12-2016: Electromagnetic compatibility (EMC). Part 3-12. Norms. Norms of harmonic current components created by equipment connected to public low-voltage systems, with an input current of more than 16 A, but not more than 75 A in one phase

GOST IEC 61000-3-2-2017: Electromagnetic compatibility (EMC). Part 3-2. Limits. Limits for harmonic current emissions (equipment input current 16 A per phase)

GOST IEC 61000-3-3-2015: Electromagnetic compatibility (EMC). Part 3-3. Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase connected to the power supply network without special conditions

GOST IEC 61000-4-3-2016: Electromagnetic compatibility (EMC). Part 4-3. Methods of tests and measurements. The test for resistance to the emitted radio frequency electromagnetic field

GOST IEC 61000-4-34-2016: Electromagnetic compatibility (EMC). Part 4-34. Methods of tests and measurements. Tests for resistance to failures, short interruptions and changes in the power supply voltage of equipment with a current consumption of more than 16 A per phase

GOST IEC 61000-4-4-2016: Electromagnetic compatibility (EMC). Part 4-4. Methods of tests and measurements. The test for the resistance to electrical fast transient processes (packets)

GOST IEC 61000-4-5-2017: Electromagnetic compatibility (EMC). Part 4-5. Testing and measurement techniques. Surge immunity test

GOST R 51317.4.6-99: Electomagnetic compatibility of technical equipment. Immunity to conducted disturbance induced by radio-frequency fields. Requirements and test methods

The Document is Referenced By:

Letter 15153/05-DG: About the application of the standards

Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!