GOST IEC 61000-4-5-2017
ГОСТ IEC 61000-4-5-2017
|
|
Electromagnetic compatibility (EMC). Part 4-5. Testing and measurement techniques. Surge immunity test
Электромагнитная совместимость (ЭМС). Часть 4-5. Методы испытаний и измерений. Испытание на устойчивость к выбросу напряжения
Status: Effective - Introduced for the first time. IUS 3-2018
This standard establishes the noise immunity requirements, test methods and the range of recommended test levels for equipment, taking into account unipolar surge emissions caused by transient overvoltages due to switching or lightning discharges. Established several test levels related to different environmental conditions and placement. These requirements are designed and applicable to electrical and electronic equipment. The purpose of this standard is to establish a basis for assessing the immunity of electrical and electronic equipment when exposed to voltage surges. The test method presented in this standard describes an agreed method for assessing the stability of an equipment or system in relation to a specific phenomenon.
Настоящий стандарт устанавливает требования помехоустойчивости, методы испытаний и диапазон рекомендуемых испытательных уровней для оборудования с учетом однополярных выбросов напряжения, вызванных перенапряжениями от переходных процессов в результате коммутации или разрядов молнии. Установлены несколько испытательных уровней, относящихся к различным условиям окружающей обстановки и размещения. Эти требования разработаны и применимы для электрического и электронного оборудования. Целью настоящего стандарта является установление основы для оценки помехоустойчивости электрического и электронного оборудования при воздействии выбросов напряжения. Метод испытания, представленный в настоящем стандарте, описывает согласованный метод для оценки устойчивости оборудования или системы в отношении определенного явления
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/14/2017
SKU: RUSS287125
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.20 Security »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.20 Security »
The Document is Referenced By:
GOST 30379-2017: Electromagnetic compatibility of technical equipment for intruder, fire and intruder-fire alarm systems. Requirements, limits and testing techniques for immunity and emission
GOST 32133.2-2013: Electromagnetic compatibility of technical equipment. Uninterruptible power systems. Requirements and test methods
GOST 34594.1-2019: Electromagnetic compatibility. "Smart city." General Provisions
GOST 34594.2.1-2019: Electromagnetic compatibility. "Smart city." EMC requirements
GOST 34594.2.2-2019: Electromagnetic compatibility. "Smart city." EMC immunity requirements
GOST 34883-2022: Power frequency overvoltage protection devices (UVPH) for domestic and similar purposes
GOST EN 12016-2020: Electromagnetic compatibility. Standard for a group of homogeneous products for elevators, escalators and passenger conveyors. Immunity
GOST IEC 60947-3-2022: Low-voltage distribution and control equipment. Part 3. Circuit breakers, disconnectors, switch-disconnectors, and combinations thereof with fuses
GOST IEC 60974-10-2017: Arс welding equipment. Part 10. Electromagnetic compatibility (EMC) requirements
GOST IEC 61000-6-5-2017: Electromagnetic compatibility (EMC). Part 6-5. Generic standards. Immunity for equipment used in power station and substation environment
GOST IEC 61000-6-7-2019: Electromagnetic compatibility (EMC). Part 6-7. General standards. Immunity requirements for equipment designed to perform functions in a safety-related system (functional safety) in industrial locations
GOST IEC 61543-2022: Residual current operated protective devices (RCD-D) for household and similar applications. Electromagnetic compatibility
GOST IEC 61643-12-2022: Low-voltage surge protectors. Part 12. Surge voltage protective devices for low-voltage power distribution systems. Principles of selection and use
GOST IEC 61643-22-2022: Low-voltage surge protectors. Part 22. Surge voltage protective devices connected to telecommunications and signalling networks. Principles of selection and use
GOST IEC 62115-2022: Electric toys. Safety
GOST IEC/TR 61000-1-5-2017: Electromagnetic compatibility (EMC). Part 1-5. General provisions. Impact electromagnetic high power (EMBM) on civilian systems
GOST R 56188.3.201-2023: Fuel Cell Technologies. Part 3-201. Stationary fuel cell power plants. Test methods for determining the performance of small power plants
GOST R 58707-2019: Board electronic game for volleyball, basketball, football, handball with a protective screen. Technical requirements and test methods
GOST R 60.2.3.1-2021: Robots and robotic devices. Personal care service robots. Safety test methods in accordance with the requirements of GOST R 60.2.2.1-2016
Letter 15153/05-DG: About the application of the standards
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
