GOST IEC 61984-2016
ГОСТ IEC 61984-2016
|
|
Connectors. Safety requirements and tests
Соединители. Требования безопасности и испытания
Status: Effective - Introduced for the first time. IUS 10-2017
This standard applies to connectors with nominal voltages above 50 V to 1000 V AC and DC and rated currents up to 125 A per contact for which there are either no technical conditions or this standard concerns them in terms of safety. For connectors with a rated voltage of up to 50 V, this standard can serve as a guide. In this case, reference to IEC 60664-1 should be made for air gaps and leakage distances. This standard can also serve as a guide for connectors with a rated current of more than 125 A per pole. This standard does not apply to connectors used in equipment or equipment, the purpose of which may require special safety requirements for connectors
Настоящий стандарт распространяется на соединители с номинальными напряжениями свыше 50 В до 1000 В переменного и постоянного тока и номинальными токами до 125 А на контакт, на которые либо отсутствуют технические условия, либо настоящий стандарт касается их в части безопасности. Для соединителей на номинальное напряжение до 50 В настоящий стандарт может служить в качестве руководства. В этом случае для воздушных зазоров и расстояний утечки следует делать ссылку на IEC 60664-1. Настоящий стандарт также может служить руководством для соединителей на номинальный ток свыше 125 А на полюс. Настоящий стандарт не распространяется на соединители, применяемые в оборудовании или на оборудовании, назначение которого может потребовать особых требований безопасности для соединителей
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/23/2017
SKU: RUSS287141
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.30 Plugs, sockets, connectors »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.30 Plugs, sockets, connectors »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 22483-2012: Conductors for cables, wires and cords
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 28380-89: Solderless connections. Part 1. Solderless wrapped connections. General requirements, test methods and practical guidance
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 30849.1-2002: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements
GOST 31195.2.3-2012: Connecting devices for low voltage circuits for household and similar purposes. Part 2-3. Particular requirements for connecting devices as separate entities with insulation priercing clamping units
GOST 31602.2-2012: Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper coductors. Part 2. Particular reqirements for conductors from 35 up to 300 kv. mm
GOST IEC 60664-5-2013: Insulation coordination for equipment within low-voltage systems. Part 5. Comprehensive method for determining clearances and creepage distance equal to or less than 2 mm
GOST IEC 61140-2012: Protection against electric shock. Common aspects for installation and equipment
GOST IEC 61210-2011: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
GOST R IEC 61032-2000: Protection of persons and equipment by enclosures. Probes for verification
The Document is Referenced By:
GOST IEC 60598-2-21-2017: Luminaires. Part 2-21. Particular requirements. Rope lights
GOST R 60.2.0.1-2022: (ISO 22166-1:2021) Robots and robotic devices. Modular principle of construction of service robots. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
