imgalt

GOST ISO 898-2-2015

ГОСТ ISO 898-2-2015

Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 2. Гайки установленных классов прочности с крупным и мелким шагом резьбы

Status: Effective - Introduced for the first time. IUS 1-2017

This standard establishes the mechanical and physical properties of nuts with coarse and fine thread pitch of carbon and alloyed steels when tested in conditions with an ambient temperature from 10 ° C to 35 ° C. Nuts are evaluated for compliance with the requirements of this standard only in the specified temperature range. Products may not maintain their established mechanical and physical properties at higher and lower temperatures.

Настоящий стандарт устанавливает механические и физические свойства гаек с крупным и мелким шагом резьбы из углеродистых и легированных сталей при испытании в условиях с температурой окружающей среды от 10 °С до 35 °С. Гайки оцениваются на соответствие требованиям настоящего стандарта только в указанном температурном диапазоне. Изделия могут не сохранять установленных механических и физических свойств при более высоких и более низких температурах

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/27/2016

SKU: RUSS287355

Price: $446.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G3 Fasteners for general engineering applications » G33 Nuts »


The Document References:

GOST 14017-68: State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification

GOST 1497-84: Metals. Methods of tension test

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST ISO 16426-2015: Fasteners. Quality assurance system

GOST ISO 6157-2-2015: Fasteners. Surface discontinuities. Part 2. Nuts

The Document is Referenced By:

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals

GOST ISO 10511-2016: Prevailing torque type hexagon thin nuts (with non-metallic insert)

GOST ISO 10512-2016: Prevailing torque type hexagon nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10

GOST ISO 10513-2016: Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12

GOST ISO 10684-2015: Fasteners. Hot dip galvanized coatings

GOST ISO 12003-2-2016: Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors. Part 2. Rear-mounted roll-over protective structures. Technical requirements and test methods

GOST ISO 12126-2016: Prevailing torque type all-metall hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B

GOST ISO 16047-2015: Fasteners. Torque/clamp force testing

GOST ISO 21670-2015: Fasteners. Nuts hexahedral welded with flange

GOST ISO 2320-2015: Prevailing torque type steel nuts. Mechanical and performance properties

GOST ISO 3269-2015: Fasteners. Acceptance inspection

GOST ISO 6157-2-2015: Fasteners. Surface discontinuities. Part 2. Nuts

GOST ISO 7042-2016: Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12

GOST ISO 7044-2016: Prevailing torque type all-metall hexagon nuts with flange, style 2. Product grades A and B

GOST ISO 8082-1-2017: Forest vehicles self-propelled. Rollover protection devices. Technical requirements and test methods. Part 1. General purpose machines

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 8992-2015: Fasteners. General requirements for bolts, screws, studs and nuts

GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58799-2020: Automotive vehicles. Hexagonal weld nuts

GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements

GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work

PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications

PNST 679-2022: Oil and gas industry. Underwater production systems. Marine equipment delivered by sea transport

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English
Price: $134.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!