GOST ISO 8992-2015
ГОСТ ISO 8992-2015
|
|
Fasteners. General requirements for bolts, screws, studs and nuts
Изделия крепежные. Общие требования для болтов, винтов, шпилек и гаек
This standard establishes the general requirements for standard bolts, screws, studs and nuts, as well as non-standard fasteners. The standard should be applied with reference standards for tolerances, mechanical and operational properties, geometric elements, surface defects, final surface treatment and quality assurance.
Настоящий стандарт устанавливает общие требования к стандартным болтам, винтам, шпилькам и гайкам, а также к нестандартным крепежным изделиям. Стандарт следует применять со ссылочными стандартами на допуски, механические и эксплуатационные свойства, геометрические элементы, дефекты поверхности, окончательную обработку поверхности и обеспечение качества
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/27/2016
SKU: RUSS287357
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G33 Nuts »
The Document References:
GOST 10753-86: Cross recesses for screws and wood screws. Dimensions and control methods
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 12414-94: Ends of bolts, screws and studs. Sizes
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 24670-81: Bolts, screws and wood screws. Radius under the head
GOST 27148-86: Fasteners. Screw thread run-out. Washout threads, total thread run-outs and intercuts. Dimensions
GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals
GOST ISO 10684-2015: Fasteners. Hot dip galvanized coatings
GOST ISO 1478-2015: Tapping screws thread
GOST ISO 16048-2014: Passivation of fasteners made of corrosion-resistant stainless steel
GOST ISO 16426-2015: Fasteners. Quality assurance system
GOST ISO 2320-2015: Prevailing torque type steel nuts. Mechanical and performance properties
GOST ISO 2702-2015: Heat-treated steel tapping screws. Mechanical properties
GOST ISO 3269-2015: Fasteners. Acceptance inspection
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts
GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress
GOST ISO 3506-4-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 4. Self-tapping screws
GOST ISO 4042-2015: Fasteners. Electroplated coatings
GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C
GOST ISO 6157-1-2015: Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements
GOST ISO 6157-2-2015: Fasteners. Surface discontinuities. Part 2. Nuts
GOST ISO 6157-3-2014: Fasteners. Defects of surface. Part 3. Bolts, screws and studs, special
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch
GOST ISO 898-7-2015: Mechanical properties of fasteners. Part 7. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
GOST ISO 965-5-2015: Basic norms of interchangeability. ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
GOST R ISO 10664-2007: Star-type internal socket button for bolts and screws
GOST R ISO 10683-2013: Fasteners. Non-electrolytically zinc flake coatings
GOST R ISO 7378-93: Fasteners. Bolts, screws and studs. Split pin holes and wire holes
GOST R ISO 7721-2011: Countersunk head screws. Head configuration and gauging
The Document is Referenced By:
GOST ISO 10511-2016: Prevailing torque type hexagon thin nuts (with non-metallic insert)
GOST ISO 10512-2016: Prevailing torque type hexagon nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
GOST ISO 10513-2016: Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
GOST ISO 12126-2016: Prevailing torque type all-metall hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B
GOST ISO 14579-2015: Bolts with cylindrical head and star-type internal socket button
GOST ISO 14583-2015: Screws with rounded head and star-shaped recession for wrench
GOST ISO 21670-2015: Fasteners. Nuts hexahedral welded with flange
GOST ISO 7042-2016: Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
GOST ISO 7044-2016: Prevailing torque type all-metall hexagon nuts with flange, style 2. Product grades A and B
GOST R 52854-2020: Automotive vehicles. Star head bolts with small flange
GOST R 58799-2020: Automotive vehicles. Hexagonal weld nuts
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
