imgalt

GOST R 15.301-2016

ГОСТ Р 15.301-2016

System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

Система разработки и постановки продукции на производство. Продукция производственно-технического назначения. Порядок разработки и постановки продукции на производство

Status: Effective - Supersedes. IUS 4-2017

This standard establishes the procedure for the development and production of industrial-technical products, including rules for the development of technical specifications, design and technological documentation, acceptance of the results of development, preparation and development of production, testing of prototypes of products and products manufactured during the development of production, and also the rules for confirming their compliance with mandatory requirements. If necessary, the rules established in this standard can be specified in the standards of organizations and

Настоящий стандарт устанавливает порядок разработки и постановки на производство продукции производственно-технического назначения, в том числе правила разработки технического задания, конструкторской и технологической документации, приемки результатов разработки, подготовки и освоения производства, проведения испытаний опытных образцов продукции и продукции, изготовленной при освоении производства, а также правила подтверждения их соответствия обязательным требованиям. При необходимости, правила, установленные в настоящем стандарте, могут быть конкретизированы в стандартах организаций и /или иных документах этих организаций. Стандарт не распространяется на воздушные суда и морские суда гражданского назначения

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 10/31/2016

SKU: RUSS287456

Price: $139.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.1 General requirements for testing, environments, equipment and measuring instruments »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.2 Basic test procedures » 11.2.1 Inspection »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 2 Product quality assurance » 2.1 Ensuring product quality at stage of technical preparation of production » 2.1.2 Technological preparation of production »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.01 General. Terminology. Standardization. Documentation (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.01 General. Terminology. Standardization. Documentation (Dictionaries) »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Development and launch of products for production »


As a Replacement Of:

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

The Document References:

Federal Law 223-FZ: On the procurement of goods, works, services by certain types of legal entities

Federal Law 412-FZ: On accreditation in the national accreditation system

Federal Law 44-FZ: About the contract system in the field of procurement of goods, works, services to ensure state and municipal needs

GOST 15.311-90: System of product development and launching into manufacture. Launching of products under foreign companies technical documents

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 2.001-2013: Unified system for design documentation. General principles

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 2.103-2013: Unified system for design documentation. Stages of designing

GOST 2.105-95: General requirements for writing documents

GOST 2.106-96: Unified system for design documentation. Text documents

GOST 3.1001-2011: Unified system for technological documentation. General principles

GOST 8.568-99: State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration

GOST R 15.000-2016: System of product development and launching into manufacture. Basic provisions

GOST R 15.011-96: System of products development and launching into manufacture. Patent investigations. Procedure and scope

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R ISO 10006-2005: Quality management systems. Guidelines for quality management in projects

GOST R ISO 9001-2015: Quality management systems. Requirements

PR 50-718-99: Requirements for Compiling and Submitting Product Data Sheets

R 50.1.011-96: State supervision of compliance with the mandatory requirements of state standards at the stages of development, preparation for the production and operation of industrial products

R 50.1.013-97: Methods of conducting state supervision over compliance with the mandatory requirements of state standards, rules of mandatory certification and certified products at the sales (sales) stage

The Document is Referenced By:

GOST 1983-2015: Voltage transformers. General specifications

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 24033-2018: Windows, doors and gates. Mechanical test methods

GOST 28006-2023: Carbon structural tape. Technical specifications

GOST 28301-2015: Grain harvesters. Test methods

GOST 28718-2016: Agricultural machinery. Machine for introduction of solid organic fertilizers. Test methods

GOST 28722-2018: Agricultural machinery. Mowers and mower conditioners. Test methods

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications

GOST 33122-2022: Adhesives for load-bearing wooden structures. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33677-2015: Machines and tools for row and row tillage. Methods of tests

GOST 33687-2015: Machines and tools for surface treatment of soil. Methods of tests

GOST 33736-2016: Agricultural machinery. Machines for deep tillage. Test methods

GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications

GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications

GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications

GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications

GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 34748-2021: Agricultural machinery. Feed dispensers. Test methods

GOST 34881-2022: Trunk pipeline transport of oil and petroleum products. Stationary booms for containment of oil and oil products spills. General technical conditions

GOST 34904-2022: Ship pipeline valves. General specifications

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 7746-2015: Current transformers. General specifications

GOST 9630-2018: Three-phase asynchronous motors with voltages above 1000 V. General specifications

GOST R 12.4.273-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air supply apparatus completed with face mask or mouthpiece (escape breathing apparatus). Technical requirements. Test methods. Marking

GOST R 12.4.277-2012: Occupational safety standards system. Respiratory protective devices. Respiratory lung-governed protective device for escape with compressed air, half mask and positive pressure. Technical requirements. Test methods. Marking

GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements

GOST R 22.3.14-2018: Safety in emergency situations. Collective protective equipment. Air cleaning devices filtering. General technical requirements. Test methods

GOST R 22.3.15-2018: Safety in emergency situations. Collective protective equipment. Air regeneration devices. General technical requirements. Test methods

GOST R 50.04.08-2019: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of tests. Order of conduct

GOST R 50.04.09-2019: Conformity assessment system in the field of atomic energy use. Development and putting into production of the constituent parts of the active zones of nuclear facilities and the assessment of their conformity in the form of tests. Order of conduct

GOST R 50.06.01-2017: Conformity assessment system for the use of nuclear energy. Сonformity assessment of products in the form of acceptance. The procedure of

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 51269-99: TV receiving aerials for television and sound broadcasting stations in VHF and UHF frequency bands. General technical requirements

GOST R 53257-2009: Fire equipment. Full face masks breathing apparatus. General technical requirements. Test methods

GOST R 53259-2019: Fire fighting equipment. Insulating fire self-rescuers with compressed air to protect people from toxic combustion products when rescuing from smoky rooms during a fire. General technical requirements. Test methods

GOST R 53260-2019: Fire fighting equipment. Fire-fighting insulating self-rescuers with chemically bound oxygen to protect people from toxic combustion products when rescuing from smoky rooms during a fire. General technical requirements. Test methods

GOST R 53261-2019: Fire fighting equipment. Filter fire self-rescuers to protect people from toxic combustion products when rescuing from smoky rooms during a fire. General technical requirements. Test methods

GOST R 53262-2009: Fire equipment. Devices for control breathing apparatuses. General technical requirements. Test methods

GOST R 53264-2019: Fire fighting equipment. Firefighter's clothes are special protective. General technical requirements. Test methods

GOST R 53265-2019: Fire fighting equipment. Personal protective equipment for firefighter legs. General technical requirements. Test methods

GOST R 53266-2009: Fire equipment. Fire saving cord. General technical requirements. Test methods

GOST R 53266-2019: Fire fighting equipment. Fire rescue rope. General technical requirements. Test methods

GOST R 53267-2019: Fire fighting equipment. Firefighter carbine. General technical requirements. Test methods

GOST R 53269-2019: Fire fighting equipment. Helmets are fire. General technical requirements. Test methods

GOST R 53275-2009: Fire equipment. Fire department hand-operated ladders. General technical requirements. Test methods

GOST R 53275-2019: Fire fighting equipment. Manual fire ladders. General technical requirements. Test methods

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing

GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods

GOST R 53560-2022: Alarm systems. Power supply sources. Classification. General technical requirements and test methods

GOST R 54828-2022: Complete gas-insulated metal-insulated switchgear (GIS) for rated voltages of 110 kV and above. General specifications

GOST R 54982-2022: Gas distribution systems. Facilities for liquefied hydrocarbon gases. General requirements for operation

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55190-2022: Complete metal-enclosed switchgear (GIS) for rated voltage up to 35 kV. General specifications

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55833-2013: Resources saving. Requirements to documentation by production of products. Policy of rational using and ecology of materials

GOST R 57308-2016: Fire equipment. Сamera protection for children for protection of the children 1, 5 years against toxic products at rescue from smoking buildings from fire. Protective devices for children for rescue of new born and small babys out of smoking areas during

GOST R 57412-2017: Computer models of product in design, manufacturing and maintenance. General

GOST R 57557-2017: Hydroacoustic alarm intruder means and systems. General technical requirements and test methods

GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications

GOST R 58045-2017: Aircraft equipment. Risk management for quality assurance through life cycle stages. Risk assessment methods and acceptability criteria

GOST R 58046-2017: Quality management systems for aviation, space and defense organizations. Advanced product quality planning. Guide to measurement process analysis

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58121.1-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 1. General

GOST R 58121.2-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes

GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings

GOST R 58190-2018: Trunk pipeline transport of oil and oil products. Heavyweight marine booms for localization oil and oil products spill in seas. General specifications

GOST R 58274-2018: Space systems. Metrological provision of technological preparation of production. Main provisions

GOST R 58361-2019: The main pipeline transport of oil and oil products. Welding equipment. General specifications

GOST R 58382-2019: Fire fighting equipment. Portable fire smoke exhausters. General technical requirements. Test methods

GOST R 58454-2019: The system of development and putting products into production. Medical Products. Terms and Definitions

GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods

GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods

GOST R 58597-2019: Additive technology. Additive technology non-destructive testing

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 58647-2019: Photovoltaic ground modules. Quality assurance. Improving technical compliance

GOST R 58685-2019: Permeable ship doors. Test Methods and Types

GOST R 58715-2019: Fire fighting equipment. Special fire trucks. General technical requirements. Test methods

GOST R 58716-2019: Fire fighting equipment. Filter fire respirators for respiratory and visual protection used in extinguishing natural fires in the open air. General technical requirements. Test methods

GOST R 58755-2019: Mobile scaffolds, collapsible. Technical specifications

GOST R 58758-2019: Platforms and stairs for construction works. General specifications

GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements

GOST R 58787-2019: Electric generating sets with internal combustion engines for nuclear power plants. General technical conditions. Accommodation

GOST R 58788-2019: Pipeline fittings of safety class 4 for technological systems of nuclear power plants. General technical requirements

GOST R 58910.1-2020: Rubber and rubber. Industrial control materials. Part 1. General requirements

GOST R 58922-2020: Sports equipment safety standards system. Sports equipment for fall protection. Strapping. General technical requirements. Test methods

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications

GOST R 59846-2021: Iron-phosphate lithium-ion rechargeable batteries and storage batteries. Technical requirements

GOST R 59989-2022: Systems Engineering. System analysis of the system quality management process

GOST R 59990-2022: Systems Engineering. System analysis of the project evaluation and control process

GOST R 59991-2022: Systems Engineering. System analysis of the risk management process for the system

GOST R 59992-2022: Systems Engineering. System analysis of the management process of the system lifecycle model

GOST R 59993-2022: Systems Engineering. System analysis of the system infrastructure management process

GOST R 59994-2022: Systems Engineering. System analysis of the quality assurance process for the system

GOST R 59998-2022: Antitrap devices for security from vehicles. General technical requirements and test methods

GOST R 70199-2022: Forest protection. Special protective clothing for extinguishing forest and other landscape (natural) fires. General technical requirements. Control methods

GOST R 70200-2022: Forest protection. Special equipment for extinguishing forest and other landscape (natural) fires. General technical requirements. Control methods

GOST R 70215-2022: Shipboard furniture and non-mechanical room equipment. Norms and test methods

GOST R 70236-2022: Pipeline valves. Shut-off valves of thermoplastic materials. General specifications

GOST R 70294-2022: The system of standards for the safety of sports equipment. Sports equipment for protection against falling from height. Sports carabiners. General technical requirements. Test methods

GOST R 70297-2022: Mining equipment. Turbines. General technical requirements and test methods

GOST R 70347-2022: Trunk pipeline transport of oil and petroleum products. Uninterruptible power supplies for auxiliary systems and automation systems. General specifications

GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications

GOST R 70518-2022: Automated systems of nuclear facilities. Metrological Support. General provisions.

GOST R 70580-2022: Space systems and complexes. Spacecraft mission control center. General requirements

GOST R 70628.3-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 3. Fittings

GOST R 70693-2023: Fire-fighting equipment. Hose-delays. General technical requirements. Test methods

GOST R 71300-2024: Mining equipment. Explosion protection means in gas suction and degassing pipelines and installations. General technical requirements and test methods

MU 1.2.3.07.0057-2018: Composition and scope of testing of special valves and actuators for nuclear power plants. Guidelines

ND 2-030101-037: Regulations for the classification of autonomous and remotely controlled surface vessels (IANS)

ODM 218.1.002-2020: Recommendations for the organization and conduct of work on standardization in the field of road facilities

OTT 1.1.3.10.1446-2018: Atom stations. Control systems important to safety. Creation, modernization and operation. General technical requirements

PNST 282-2018: Instrument transformers. Part 1. General specifications

PNST 317-2018: General automobile roads. Geosynthetic materials. Quality control

PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements

PNST 376-2019: Vibroacoustic ground control system on the airport maneuvering area. General technical requirements

PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces

PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications

PNST 691-2022: Oil and gas industry. Subsea production systems. Foundations and bottom bases. Technical Requirements

PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module

R 082-2019: Guidelines. The procedure for conducting research and development work in the interests of units of private security of the national guard of the Russian Federation without raising funds from the state defense order

RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.

RD JeO 1.1.2.01.1097-2015: Quality control of manufacturing nuclear fuel for nuclear power plants. Position

RG 1.1.3.21.1418-2018: Coordination of technical tasks and technical conditions for equipment and cable products necessary for the construction of power units of nuclear power plants of Rosenergoatom Concern. Regulations

RG 1.1.3.21.1562-2019: Coordination of technical specifications and specifications for equipment and cable products used at nuclear power plants. Regulations

SP 414.1325800.2018: Fixed formwork. Design rules

ST CKBA 125-2020: Pipe fittings. Types of control and testing

ST TsKBA 017-2005: Pipe fittings. General technical conditions

ST TsKBA 035-2017: Pipeline fittings. Designation of the design documentation and technical specifications. Design documentation scope

STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!