GOST R 51177-2017
ГОСТ Р 51177-2017
|
|
Overhead line hardware. General technical requirements
Арматура линейная. Общие технические требования
Status: Effective - Supersedes. IUS 2-2018
This standard applies to line fittings for uninsulated wires and ground wire of overhead power lines. It can also be applied to valves for overhead lines with wires protected by insulation, and similar valves for substations, as well as valves for optical cables of overhead optical communication lines
Настоящий стандарт распространяется на линейную арматуру для неизолированных проводов и грозозащитных тросов воздушных линий электропередачи. Он может также применяться к арматуре для воздушных линий с проводами, защищенными изоляцией, и аналогичной арматуре для подстанций, а также арматуре для оптических кабелей воздушных оптических линий связи
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/17/2017
SKU: RUSS287533
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Wire »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.01 Electrical wires and cables in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.01 Electrical wires and cables in general »
As a Replacement Of:
GOST R 51177-98: Overhead line hardware. General specifications
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10299-80: Button-head rivets classes B and C. Specifications
GOST 11359-75: Overhead line hardware. Range of mechanical failing loads and hard connection. Parameters and dimensions
GOST 11371-78: Washers. Specifications
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 14192-96: Cargo marking
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 15845-80: Cables products. Terms and definitions
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 17613-80: Line accessories. Terms and definitions
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 18620-86: Electrotechnical articles
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2246-70: Welding steel wire. Specifications
GOST 24346-80: Vibration. Terms and definitions
GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 27396-93: Line accessories. Ball-socket couplings of insulators. Dimensions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28818-90: Grinding materials made of aluminum-oxide abrasive
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 397-79: Split pins
GOST 6402-70: Lock washers. Specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST 9850-72: Zinc-coated steel core wire
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
GOST ISO 8673-2014: Hexagon regular nuts (style 1) with fine pitch thread. Product grades A and B
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50397-2011: Electromagnetic compatibility of technical equipment. Тerms and definitions
GOST R 51097-97: Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods
GOST R 51155-2017: Line accessories. Acceptance rules and test methods
GOST R 51178-98: Clips for ball-socket couplings of line hardware and insulators. Specifications
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 10042-2009: Welding. Arc-welding joints in aluminium and its alloys. Quality levels for imperfections
GOST R ISO 10642-2012: Hexagon socket countersunk head screws
GOST R ISO 15614-2-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 2. Arc welding of aluminium and aluminium alloys
GOST R ISO 4014-2013: Hexagon head bolts. Product grades A and B
The Document is Referenced By:
GOST R 70237-2022: Unified power system and isolated power systems. Electrical installations. Rules of arrangement. Overhead power transmission lines up to 1 kV. General requirements
GOST R 70352-2022: Fittings for overhead power lines up to 1 kV with self-supporting insulated wires. General specifications
GOST R 70399-2022: Bird protection devices at electric power industry facilities. General technical conditions
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
