GOST R 53192-2014
ГОСТ Р 53192-2014
|
|
Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
Соединения сварные в стальных конструкциях железнодорожного подвижного состава. Требования к проектированию, выполнению и контролю качества
Status: Not effective - Canceled. Registration information 1707-st dated 11/17/2016 (official website of Rosstandart); IUS 4-2017
This standard applies to the design, implementation and quality control of welded joints and welded assemblies in steel structures of railway rolling stock of climatic modifications according to GOST 15150
Настоящий стандарт распространяется на проектирование, выполнение и контроль качества сварных соединений и сварных узлов в стальных конструкциях железнодорожного подвижного состава климатических исполнений по ГОСТ 15150
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/12/2014
SKU: RUSS287577
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
As a Replacement Of:
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11969-79: Fusion welding. Basic positions and their designations
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.8-75: Devices for electric welding and plasma treatment
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements
GOST 14.201-83: Provision of technological efficiency of products design. General requirements
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 2246-70: Welding steel wire. Specifications
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 30242-97: Imperfections in metallic fusion welds. Classification, designation and definitions
GOST 3242-79: Welded joints
GOST 380-2005: Common quality carbon steel. Grades
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8050-85: Carbon dioxide,
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9087-81: Welding melted fluxes
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST R 53525-2009: Welding coordination -Tasks and responsibilities
GOST R 53526-2009: Welding personnel. Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials
GOST R 53689-2009: Welding consumables. Technical delivery conditions for welding filler materials. Type of product, dimensions, tolerances and markings
GOST R 53690-2009: Qualification test of welders. Fusion welding. Part 1. Steels
GOST R ISO 17659-2009: Welding. Multilingual terms for welded joints
GOST R ISO 3834-1-2007: Quality requirements for fusion welding of metallic materials. Part 1. Criteria for the selection of the appropriate level of requirements
GOST R ISO 5817-2009: Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals
POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations
SP 1009-73: Sanitary regulations for welding, weld deposition and metal cutting
SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises
The Document is Referenced By:
GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.