GOST R 54358-2017
ГОСТ Р 54358-2017
|
|
Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
Составы декоративные штукатурные на цементном вяжущем для фасадных теплоизоляционных композиционных систем с наружными штукатурными слоями. Технические условия
Status: Effective - Supersedes. IUS 3-2018
This standard applies to connectors with nominal voltages above 50 V to 1000 V AC and DC and rated currents up to 125 A per contact for which there are either no technical conditions or this standard concerns them in terms of safety. For connectors with a rated voltage of up to 50 V, this standard can serve as a guide. In this case, reference to IEC 60664-1 should be made for air gaps and leakage distances. This standard can also serve as a guide for connectors with a rated current of more than 125 A per pole. This standard does not apply to connectors used in equipment or equipment, the purpose of which may require special safety requirements for connectors
Настоящий стандарт распространяется на составы клеевые, базовые штукатурные и выравнивающие шпаклевочные, выпускаемые промышленным способом в виде сухих строительных смесей, содержащие полимерные добавки в количестве, не превышающ��м 5,0 % от их массы, изготавливаемые на портландцементе, белом цементе, на смешанных (сложных) минеральных вяжущих на основе портландцемента или белого цемента, предназначенные для устройства клеевого, армированного базового штукатурного и выравнивающего слоев в составе систем фасадных теплоизоляционных композиционных с наружными штукатурными слоями (СФТК), применяемые при строительстве, реконструкции и ремонте зданий и сооружений. Настоящий стандарт устанавливает технические требования к составам в сухом состоянии, растворным составам и затвердевшим составам
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/23/2017
SKU: RUSS287616
The Product is Contained in the Following Classifiers:
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
As a Replacement Of:
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 14192-96: Cargo marking
GOST 15588-2014: Polystyrene insulating slabs. Specifications
GOST 22551-77: Quartz sand, ground sandstone, quartzite and vinyl quartz for glass industry. Specifications
GOST 22856-89: Decorative crushed natural stone and sand. Specifications
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25898-2012: Building materials and products. Methods for determination of water vapour permeability and of steam-tightness
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 33740-2016: Facade’s thermo insulation composite systems with external mortar’s lays. Terms and definitions
GOST 4.233-86: Product-quality index system. Building. Mortars. Index nomenclature
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 8.579-2002: State system for ensuring the uniformity of measurements. Requirements established for the quantity of prepackaged goods in packages of any kind during their manufacturing, packaging, selling or importing
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 965-89: Portland cements, white. Specification
The Document is Referenced By:
GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.