GOST R 55682.2-2017

ГОСТ Р 55682.2-2017

Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

Котлы водотрубные и котельно-вспомогательное оборудование. Часть 2. Материалы для деталей котлов, работающих под давлением, и для вспомогательных устройств

Status: Effective - Supersedes. IUS 3-2018

This standard establishes the requirements for the materials listed below and semi-finished products used for the manufacture of parts (for water-tube boilers) working under pressure and parts welded to parts working under pressure: - fasteners, - sheets, - castings, - forged, - welding materials, - pipes made by electroslag remelting (ESR), plasma and electric arc welding, - seamless pipes of composites, - seamless pipes of welded steel, - electric-welded pipes, - shaped steel

Настоящий стандарт устанавливает требования к перечисленным ниже материалам и полуфабрикатам, применяемым для изготовления деталей (для водотрубных котлов), работающих под давлением, и деталей, привариваемых к деталям, работающим под давлением: -крепеж, -листовой прокат, -отливки, -поковки, -сварочные материалы, -трубы, изготовленные методом электрошлаковой переплавки (ЭШП), плазменной и электродуговой сварки, -трубы бесшовные из композитов, -трубы бесшовные из свариваемой стали, -трубы электросварные, -фасонный прокат

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 46

Approved: Federal Agency for Technical Regulation and Metrology, 11/8/2017

SKU: RUSS287636

Price: $558.93




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.040 Gas and steam turbines. Steam engines »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.040 Gas and steam turbines. Steam engines »


As a Replacement Of:

GOST R 55682.2-2013: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

The Document References:

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 1215-79: Malleable iron castings

GOST 1412-85: Flakish graphite cast iron

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1497-84: Metals. Methods of tension test

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19281-2014: High strength rolled steel. General specification

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8694-75: Tubing (pipes). Expansion testing method

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST 977-88: Steel castings. General specifications

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch

GOST R 53689-2009: Welding consumables. Technical delivery conditions for welding filler materials. Type of product, dimensions, tolerances and markings

GOST R 55682.12-2013: Water-tube boilers and auxiliary installations. Part 12. Requirements for boiler feed water and boiler water quality

GOST R 55682.3-2017: Water-tube boilers and auxiliary installations. Part 3. Design and calculation for pressure parts

GOST R 55682.5-2017: Water-tube boilers and auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler

GOST R 55682.6-2017: Water-tube boilers and auxiliary installations. Part 6. Inspection during construction, documentation and marking of pressure parts of the boiler

GOST R 55682.7-2017: Water-tube boilers and auxiliary installations. Part 7. Requirements for equipment for the boiler

GOST R EN 12074-2010: Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes

GOST R EN 13479-2010: Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials

GOST R ISO 2560-2009: Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification

GOST R ISO 2566-1-2009: Steel. Conversion of elongation values. Part 1. Carbon and low alloy steel

GOST R ISO 2566-2-2009: Steel. Conversion of elongation values. Part 2. Austenitic steel

GOST R ISO 3580-2009: Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3-341-75: Cold-rolled fin pipes from steel grades 12H1MF and 20 for steam boilers

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

The Document is Referenced By:

GOST R 55682.5-2017: Water-tube boilers and auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler

GOST R 55682.6-2017: Water-tube boilers and auxiliary installations. Part 6. Inspection during construction, documentation and marking of pressure parts of the boiler

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!