GOST R 56277-2014
ГОСТ Р 56277-2014
|
|
Polymer composite pipes and fittings for intrafield pipelines. Specifications
Трубы и фитинги компо��итные полимерные для внутрипромысловых трубопроводов. Технические условия
Status: Effective - Introduced for the first time. IUS 7-2015
This standard applies to polymer composite pipes and fittings intended for underground and aboveground field pipelines of the oil and gas industry (hereinafter referred to as pipes and fittings) transporting oil, including high-watered, oil-and-water mixtures and emulsions, oil products, industrial wastewater, associated oil gas, gas condensate and other corrosive media containing hydrogen sulphide, carbon dioxide, sulfur, salts, free oxygen, mechanical impurities, exploited at at pressure up to 4 MPa and at operating temperature from minus 65 degrees Celsius to plus 90 degrees Celsius
Настоящий стандарт распространяется на полимерные композитные трубы и фитинги, предназначенные для подземных и надземных внутрипромысловых трубопроводов нефтяной и газовой промышленности (далее-трубы и фитинги), транспортирующих нефть, в том числе высокообводненную, нефтегазоводяные смеси и эмульсии, нефтепродукты, сточные промысловые воды, попутный нефтяной газ, газовый конденсат и другие коррозионные среды с содержанием сероводорода, углекислого газа, серы, солей, свободного кислорода, механических примесей, эксплуатируемые при рабочем давлении до 4 МПа и при рабочей температуре от минус 65 градусов Цельсия до плюс 90 градусов Цельсия
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/26/2014
SKU: RUSS287749
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 15975-70: Silicon grease type KB-3/10Э. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 20010-93: Industrial rubber gloves
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30402-96: Building materials Ignitability Test Meth
GOST 32652-2014: Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods
GOST 32794-2014: Polymer composites. Terms and definitions
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7661-67: Dial depth gauges. Specifications
GOST 9078-84: Flat pallets
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
GOST R 55135-2012: Plastics. Differential scanning calorimetry (DSC). Part 2. Determination of glass transition temperature
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
The Document is Referenced By:
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.