GOST R 56306-2014
ГОСТ Р 56306-2014
|
|
Silver. Method of inductively coupled plasma atomic-emission analysis
Серебро. Метод атомно-эмиссионного анализа с индуктивно связанной плазмой
Status: Not effective - Canceled. Registration information 529-st dated 08/28/2018 (Rosstandart official website); IUS 11-2018
This standard applies to asphalt mixes and asphalt, intended for the device design layers of road pavement on public roads. This standard establishes a method for determining the dynamic modulus of elasticity and yield number of asphalt concrete on samples with a nominal maximum aggregate size of not more than 37.5 mm using an installation for testing performance characteristics
Настоящий стандарт распространяется на аффинированное серебро с массовой долей серебра не менее 99,8 %. Стандарт устанавливает атомно-эмиссионный с индуктивно связанной плазмой метод определения примесей: алюминия, висмута, железа, золота, кадмия, кобальта, кремния, магния, марганца, меди, мышьяка, никеля, олова, палладия, платины, родия, свинца, селена, сурьмы, теллура, титана, хрома и цинка в аффинированном серебре
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/12/2014
SKU: RUSS287766
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.3 Non-ferrous and precious metals »
ISO classifier »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.99 Other non-ferrous metals and their alloys »
National standards »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.99 Other non-ferrous metals and their alloys »
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10298-79: Technical selenium. Specifications
GOST 10587-84: Uncured epoxy resins. Specifications
GOST 1089-82: Antimony. Specifications
GOST 10928-90: Bismuth. Specifications
GOST 11069-2001: Primary aluminium. Grades
GOST 11125-84: Super pure nitric acid. Specifications
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.013.0-91: Electrical hand-held tools
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 123-2008: Cobalt. Specifications
GOST 12342-81: Rhodium in powder. Specifications
GOST 13610-79: Iron carbonyl for radiotechnical uses. Specifications
GOST 14261-77: Hydrochloric acid super pure. Specifications
GOST 14262-78: Super pure sulphuric acid. Specifications
GOST 1467-93: Cadmium. Specifications
GOST 1497-84: Metals. Methods of tension test
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 17614-80: Tellurium technical. Technical requirements
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17746-96: Sponge titanium. Specifications
GOST 22861-93: Lead of high purity. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 26266-90: Ultrasonic transducers
GOST 2768-84: Acetone technical. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28058-89: Gold in ingots. Specifications
GOST 28595-90: Silver in ingots. Specifications
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 3640-94: Zinc. Specifications
GOST 3778-98: Lead. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 5905-2004: Metal chrome. Technical requirements and conditions of delivery
GOST 6008-90: Metallic manganese and nitrided manganese
GOST 6835-2002: Gold and gold base alloys. Marks
GOST 7.32-91: System of standards on information, librarianship and publishing. The research report. Structure and rules of presentation
GOST 804-93: Primary magnesium ingots. Specifications
GOST 849-2008: Primary nickel. Specifications
GOST 859-2014: Copper. Grades
GOST 860-75: Tin. Specifications
GOST 9428-73: Reagents. Silicon dioxide. Specifications
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 52244-2004: Refined palladium. Specifications
GOST R 52245-2004: Refined platinum. Specifications
GOST R 52361-2005: Analytical control of the object. Terms and definitions
GOST R 52501-2005: Water for analytical laboratory use. Specifications
GOST R 52599-2006: Precious metals and their alloys. General requirements for methods of analysis
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 55043-2012: Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.625-2006: State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. General technical requirements and test methods
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
The Document is Referenced By:
GOST 25474-2015: Anodes silver. Specifications
GOST 28595-2015: Silver in ingots. Specifications
GOST 6563-2016: Technical articles made from noble metals and alloys. Specifications
GOST 6902-2018: Leaf gold and silver. Specifications
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.