GOST R 56916-2016
ГОСТ Р 56916-2016
|
|
Natural combustible gas. Determination of water vapours content by Karl Fisher method
Газ горючий природный. Определение содержания водяных паров методом Карла Фишера
Status: Effective - Introduced for the first time. IUS 10-2016
This standard establishes the determination of the water vapor content by Karl Fischer’s method in natural combustible gas (hereinafter referred to as HGP) coming from field preparation facilities, underground gas storages and gas processing plants into main gas pipelines transported through them and supplied to gas distribution systems used as raw materials and industrial and municipal fuels, as well as compressed gas engine fuel for internal combustion engines
Настоящий стандарт устанавливает определение содержания водяных паров методом Карла Фишера в природном горючем газе (далее-ГГП), поступающем с установок промысловой подготовки, подземных хранилищ газа и газоперерабатывающих заводов в магистральные газопроводы, транспортируемом по ним, и поставляемом в системы газораспределения, используемом в качестве сырья и топлива промышленного и коммунально-бытового назначения, а также в качестве компримированного газомоторного топлива для двигателей внутреннего сгорания
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/26/2016
SKU: RUSS287857
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
The Document References:
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 13045-81: Rota meters
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 14870-77: Reagents. Methods for determination of water
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.1.3.05-82: Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 17.4.2.01-81: Nature protection. Soils. Nomenclature of sanitary conditions indices
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 19433-88: Dangerous goods. Classification and marking
GOST 22387.2-97: Combustible natural gases. Methods for determination of hydrogen sulphide and sulphur mercaptan
GOST 28498-90: Liquid-in-glass thermometers
GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements
GOST 30852.10-2002: Electrical apparatus for explosive gas atmospheres. Part 11. Intrinsic safety i
GOST 30852.11-2002: Explosionproof electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GOST 30852.19-2002: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
GOST 30852.5-2002: Explosionprotected electrical apparatus. Part 4. Method of test for ignition temperature
GOST 31370-2008: Natural gas. Sampling guidelines
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 6709-72: Distilled water. Specifications
GOST 8.547-2009: State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of gases
GOST 8984-75: Silica gel indicator. Technical conditions
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 9433-80: Grease ЦИАТИМ-221. Specifications
GOST OIML R 111-1-2009: State system for ensuring the uniformity of measurement. Weights of accuracy classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1 Metrological and technical requirements.
GOST OIML R 76-1-2011: State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
SanPiN 2.1.7.1287-03: Sanitary-epidemiologic requirements to soil quality
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
The Document is Referenced By:
Decision 112: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On safety of combustible natural gas prepared for transportation and (or) use" (TR EAEC 046/2018) and conformity assessment of technical regulation
GOST R 56188.3.200-2023: Fuel Cell Technologies. Part 3-200. Stationary fuel cell power plants. Test methods for determining operating characteristics
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.