imgalt

GOST R 57180-2016

ГОСТ Р 57180-2016

Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

Соединения сварные. Методы определения механических свойств, макроструктуры и микроструктуры

Status: Effective - Introduced for the first time. IUS 3-2017

The standard applies to structures, components and parts that have welded joints obtained using welding-surfacing and related technologies, as well as filler and auxiliary materials used in the implementation of these technologies, and establishes methods for testing their mechanical properties and determining the macro and microstructure . The methods used in the development of technologies for the manufacture and repair of structures and parts, their quality control through technical expertise (metallographic research)

Стандарт распространяется на конструкции, узлы и детали, имеющие сварные соединения, полученные с применением сварочно-наплавочных и родственных технологий, а также на присадочные и вспомогательные материалы, используемые при реализации данных технологий, и устанавливает методы испытания их механических свойств и определения макро-и микроструктуры. Методы применяют при разработке технологий изготовления и ремонта конструкций и деталей, контроля их качества путем проведения технических экспертиз (металлографических исследований)

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 10/21/2016

SKU: RUSS288120

Price: $414.00



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 10. Production » 10.3 Welding »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.1 General requirements for tests on external factors »

ISO classifier » 19 TESTS » 19.060 Mechanical test »

National standards » 19 TESTS » 19.060 Mechanical test »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.200 Heat treatment »

National standards » 25 MECHANICAL ENGINEERING » 25.200 Heat treatment »


The Document References:

Federal Law 412-FZ: On accreditation in the national accreditation system

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 10054-75: Water-resistant abrasive paper

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 10708-82: Pendulum impact machines

GOST 11150-84: Metals. Methods of tension tests at low temperatures

GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase

GOST 12.0.003-2015: Occupational safety standard system. Dangerous and harmful production effects. Classification

GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.019-2017: Occupational safety standards system. Electrical safety. General requirements and nomenclature of types of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.009-99: Metal-working machines. General safety requirements

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.107-85: Occupational safety standards system. Noise. Metal-cutting machine tools. Allowable noise characteristics

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests

GOST 12026-76: Filter paper for laboratory application

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 162-90: Depth gauges. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19200-80: Iron and steel castings. Terms and definitions of defects

GOST 20831-75: System of equipment maintenance and repair. Procedure of repaired equipment quality estimation

GOST 21073.1-75: Non-ferrous metals. Determination of grain size by comparison with microstructure scale

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22838-77: Heat-resistant alloys. Methods of testing and estimation of macrostructures

GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading

GOST 25.507-85: Strength calculation and testing in machine building. Methods of fatigue testing under service loading. General requirements

GOST 25706-83: Magnifiers

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2999-59: Metals. Test methods. Measurement of hardness by a diamond pyramid (according to Vickers)

GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 3443-77: Cast iron castings with graphite of different form. Methods of structure determination

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5272-68: Corrosion of Metals. Terms

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands

GOST 5962-67: Rectified ethyl alcohol. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST 8233-56: Steel. Microstructure standards

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9206-80: Diamond powders

GOST 9450-60: Metals. Method for testing for micro hardness by pressing a diamond pyramid

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 55878-2013: Rectified hydrolytic technical ethyl alcohol. Specifications

GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements

GOST R ISO 6520-1-2012: Welding and allied process. Classification of geometric imperfections in metallic materials. Part 1. Fusion welding

NPB 155-2002: Fire engineering. Fire extinguishers. The order of statement of fire extinguishers on production and realizations of certified tests

SanPiN 2.2.2/2.4.1340-03: Hygienic requirements for personal electronic computers and work organization

SN 245-71: Sanitary standards for the design of industrial enterprises

The Document is Referenced By:

GOST R 59849-2021: Welded body structure joints for railway rolling stock made of aluminium alloys. Design, manufacturing, repair and quality control requirements.

PNST 618-2022: Oil and gas industry. Subsea production systems. Welding and Inspection of Pipeline Welds

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!