GOST R 57255-2016
ГОСТ Р 57255-2016
|
|
Photo catalytic self-cleaning concrete. Specifications
Бетоны фотокаталитические активные самоочищающиеся. Технические условия
This standard applies to photocatalytic active self-cleaning concretes of dense, large-pore and porous structures according to GOST 25192 (hereinafter photocatalytic concretes), as well as to concrete mixes produced using photocatalytic additives according to GOST 24211. This standard establishes the technical requirements for photocatalytic concrete, methods their tests and acceptance rules, as well as requirements for materials used for their manufacture. Photocatalytic concretes are used for precast concrete and reinforced concrete products and prefabricated structures, including small items (hereinafter referred to as products), and for monolithic structures. The requirements of this standard must be observed when developing new and revising existing standards, specifications, design and technological documentation for concrete mixes, precast and monolithic concrete and reinforced concrete structures and products from photocatalytic concrete. The recommended product range and designs of photocatalytic concrete are given in Appendix A.
Настоящий стандарт распространяется на фотокаталитические активные самоочищающиеся бетоны плотной, крупнопористой и поризованной структуры по ГОСТ 25192 (далее-фотокаталитические бетоны), а также на товарные бетонные смеси, изготовляемые с применением фотокаталитических добавок по ГОСТ 24211. Настоящий стандарт устанавливает технические требования к фотокаталитическим бетонам, методы их испытаний и правила приемки, а также требования к материалам, применяемым для их изготовления. Фотокаталитические бетоны применяют для сборных бетонных и железобетонных изделий и конструкций заводского изготовления, включая мелкоштучные изделия (далее-изделия), и для монолитных конструкций. Требования настоящего стандарта необходимо соблюдать при разработке новых и пересмотре действующих стандартов, технических условий, проектной и технологической документации на бетонные смеси, сборные и монолитные бетонные и железобетонные конструкции и изделия из фотокаталитического бетона. Рекомендуемая номенклатура изделий и конструкций из фотокаталитического бетона приведена в приложении А
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/10/2016
SKU: RUSS288200
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25192-2012: Concretes. Classification and general technical requirements
GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 7473-2010: Fresh concrete. Specifications
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
SanPiN 2.1.2.729-99: Polymer and polymer containing construction. Materials. Products and structures. Hygienic requirements
SanPiN 2.2.3.1385-03: Hygienic requirements for enterprises producing building materials and structures
SanPiN 2.6.1.2523-09: Norms of radiation safety
SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
