GOST R 57587-2017
ГОСТ Р 57587-2017
|
|
Products obtained by additive processes. Methods of control and testing
Изделия, полученные методом аддитивных технологических процессов. Методы контроля и испытаний
Status: Effective - Introduced for the first time. IUS 12-2017
This standard applies to products obtained in technologies of additive production (hereinafter referred to as AP): hazardous production facilities supervised by Rostechnadzor, orders of the Ministry of Defense of the Russian Federation, products used in technological processes of nuclear facilities (hereinafter OIAE) and
Настоящий стандарт распространяется на изделия, полученные в технологиях аддитивного производства (далее-АП): -опасные производственные объекты, поднадзорные Ростехнадзору, -заказы Министерства обороны РФ, -изделия, применяемые в технологических процессах объектов использования атомной энергии (далее-ОИАЭ) и/или расположенных и эксплуатируемых на их территории, не отнесенных к первому, второму или третьему классу безопасности общими положениями обеспечения безопасности соответствующих ОИАЭ, -изделия общепромышленного применения, работающие в различных промышленных средах. Настоящий стандарт устанавливает основные требования к методам контроля и испытаний изделий, полученных методами аддитивных технологических процессов. Все требования настоящего стандарта являются обязательными. Настоящий стандарт пригоден для целей сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/9/2017
SKU: RUSS288544
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
71 Chemical industry »
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.020 Manufacture in chemical industry »
National standards »
71 CHEMICAL INDUSTRY »
71.020 Manufacture in chemical industry »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.100 Chemical products »
71.100.01 Chemical industry products in general »
National standards »
71 CHEMICAL INDUSTRY »
71.100 Chemical products »
71.100.01 Chemical industry products in general »
ISO classifier »
77 METALLURGY »
77.160 Powder Metallurgy »
National standards »
77 METALLURGY »
77.160 Powder Metallurgy »
The Document References:
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 1497-84: Metals. Methods of tension test
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST R 57556-2017: Materials for additive process. Control and tests methods
GOST R 57558-2017: Additive manufacturing. General principles. Part 1. Terms and definitions
GOST R 57586-2017: Products obtained by additive processes. General requirements
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
The Document is Referenced By:
GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
