GOST R 57705-2017
ГОСТ Р 57705-2017
|
|
Mining. Safety marking for mines
Горное дело. Знаки безопасности в угольных шахтах
Status: Effective - Introduced for the first time. IUS 2-2018
This standard applies to safety signs applied in the mine workings of the coal mine (hereinafter referred to as mine), the technological complex of the surface of the mine and in industrial premises. This standard establishes the basic technical requirements for safety signs for mines, as well as recommendations for their use and locations (installation). This standard and its requirements do not apply to: - colors used for light signaling of all types of vehicles, vehicles used in the mine, - signs of the surfaces of structures, machines, equipment and other protective devices and fences that can be a source of danger for workers, safety marks for electrical equipment in the mine. The use of safety signs is recommended for all enterprises and organizations operating in mines in the territory of the Russian Federation, regardless of their forms of ownership and organizational and legal forms
Настоящий стандарт распространяется на знаки безопасности, применяемые в горных выработках угольной шахты (далее шахта), технологическом комплексе поверхности шахты и в производственных помещениях. Настоящий стандарт устанавливает основные технические требования к знакам безопасности для шахт, а также рекомендации по их применению и местам размещения (установки). Действие настоящего стандарта и изложенные в нем требования не распространяется на: -цвета, применяемые для световой сигнализации всех видов транспорта, транспортных средств, применяемые в шахте, -знаки поверхностей конструкций, машин, оборудования и других защитных устройств и ограждений, которые могут служить источником опасности для работников, -знаки безопасности для электрооборудования в шахте. Применение знаков безопасности рекомендовано для всех предприятий и организаций, осуществляющих деятельность в шахтах на территории Российской Федерации независимо от их форм собственности и организационно-правовых форм
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/22/2017
SKU: RUSS288674
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
01 General. Terminology. Standardization. Documentation »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.99 Other graphic symbols »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.080 Graphic notation »
01.080.99 Other graphic symbols »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G41 Exploration, mining and mineral processing equipment »
The Document References:
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 19433-88: Dangerous goods. Classification and marking
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST ISO 3864-1-2013: Graphic symbols. Safety colours and safety signs. Part 1. Design principles for safety signs and safety markings
GOST R 12.2.143-2009: Occupational safety standards systems. Photoluminescent evacuation systems. Requirements and methods of test
GOST R 54935-2012: Graphical symbols. Technical guidelines for the consideration of consumers’ needs
GOST R 55733-2013: The lighting of underground mines. Main requirements and measuring techniques
NPB 160-97: Signal colors. Fire safety signs. Types, dimensions and general technical requirements.
PB 03-428-02: Safety Requirements for Construction of Underground Structures
SP 52.13330.2011: Natural and artificial lighting
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
The Document is Referenced By:
GOST R 58200-2018: Mining equipment. Powered face systems. General safety requirements
GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods
GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods
PNST 296-2018: Mining. Points of switching in self-rescuers. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
