GOST R 57736-2017
ГОСТ Р 57736-2017
|
|
Mining equpment. Mine auxiliary fans. General specifications
Оборудование горно-шахтное. Вентиляторы шахтные местного проветривания. Общие технические условия
Status: Effective - Introduced for the first time. IUS 2-2018
This standard applies to copper ingots manufactured by the remelting of scrap and waste from copper and copper-based alloys and used for the manufacture of copper and copper-based alloys.
Настоящий стандарт распространяется на шахтные вентиляторы местного проветривания, применяемые на предприятиях горнорудной промышленности и на других объектах при подземном строительстве и предназначенные для проветривания тупиковых горных выработок при плотности воздуха не более 1,3 кг/м куб., температуре атмосферы от 253 (от минус 20 °С) до 308 К (плюс 35°С), запыленности воздуха не более 50 мг/м куб. и его относительной влажности до (95 ± 2) % при температуре 298 К (плюс 25°С) с номинальной подачей воздуха от 1,5 до 30 м куб./с при номинальном полном давлении не менее 800 Па
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/28/2017
SKU: RUSS288705
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
73 Mining and minerals »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.20 Equipment for ventilation, air conditioning and lighting »
National standards »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.20 Equipment for ventilation, air conditioning and lighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G41 Exploration, mining and mineral processing equipment »
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10921-90: Radial and axial fans. Aerodynamic testing methods
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 19281-2014: High strength rolled steel. General specification
GOST 19667-74: Special-purpose group container of gross mass 5,0 th for piece-goods
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21339-82: Tachometers
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements
GOST 30852.20-2002: Mininq electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and test methods
GOST 31438.2-2011: Explosive atmospheres. Explosion protection and prevention. Part 2. Basic concepts and methodology (for mining)
GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods
GOST 3242-79: Welded joints
GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
ST SEV 4790-84: Mine axial fans, local ventilation. Test methods
Technical regulations of the Customs Union 012/2011: On the safety of equipment for work in explosive atmospheres
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
