GOST R 57863-2017
ГОСТ Р 57863-2017
|
|
Polymer composites. Reinforced thermoplastic sheets. General technical requirements and test methods
Композиты полимерные. Армированные термопластичные листы. Общие технические требования и методы испытаний
Status: Effective - Introduced for the first time. IUS 2-2018
This standard applies to polymer composites and establishes general technical requirements and test methods for reinforced thermoplastic sheets.
Настоящий стандарт распространяется на полимерные композиты и устанавливает общие технические требования и методы испытаний армированных термопластичных листов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/31/2017
SKU: RUSS288836
The Product is Contained in the Following Classifiers:
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 12303-80: Boxes made from cardboard, paper
GOST 14192-96: Cargo marking
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 2.304-81: Unified system for design documentation. Letters for drawings
GOST 21140-88: Containers
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 32652-2014: Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods
GOST 32656-2017: Polymer composites. Test methods. Tensile tests
GOST 32657-2014: Polymer composites. Test methods. Determination of temperature of deflection under load
GOST 32794-2014: Polymer composites. Terms and definitions
GOST 33366.1-2015: Plastics. Symbols and abbreviated terms. Part 1. Basic polymers and their special characteristics
GOST 33366.2-2015: Plastics. Symbols and abbreviated terms. Part 2. Fillers and reinforcing materials
GOST 33372-2015: Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens
GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures
GOST 34163.2-2017: Plastics Determination of the behavior of rigid plastics during breakdown under the influence of impact. Part 2. Instrumental method
GOST 34206-2017: Plastics Method for determining shrinkage of thermosetting materials
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4647-2015: Plastics. Method for determination of Charpy impact strength
GOST 4648-2014: Plastics. Method of static bending test
GOST 4650-2014: Plastics. Methods for the determination of water absorption
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 56724-2015: Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
GOST R 56745-2015: Plastics. Determination of dynamic mechanical properties. Part 2. Torsion-pendulum method
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.