GOST R 57877-2017
ГОСТ Р 57877-2017
|
|
Fabrics for protective clothing. General specifications
Ткани для специальной одежды. Общие технические условия
Status: Effective - Introduced for the first time. IUS 2-2018
This standard establishes the technical requirements and test methods for finished fabrics intended for the manufacture of special clothing (hereinafter referred to as “workwear”) for protection against harmful and dangerous production factors and adverse environmental conditions. The standard applies to groups of fabrics of raw materials presented in Table 2. The standard does not apply to coated fabrics and fabrics used for the manufacture of departmental clothing, workwear to protect against thermal risks of an electric arc, to protect against sparks and splashes of molten metal , clothes for firefighters
Настоящий стандарт устанавливает технические требования и методы испытаний готовых тканей, предназначенных для изготовления специальной одежды (далее-спецодежды) для защиты от вредных и опасных производственных факторов и неблагоприятных природных условий. Стандарт распространяется на группы тканей сырьевых составов, представленных в таблице 2. Стандарт не распространяется на ткани с покрытием и ткани, используемые для изготовления ведомственной одежды, спецодежды для защиты от термических рисков электрической дуги, для защиты от искр и брызг расплавленного металла (для сварщиков), одежды для пожарных
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/31/2017
SKU: RUSS288854
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.5 Testing and control of light industry products »
4.5.1 Textile Industry Products »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.30 Textiles »
National standards »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.30 Textiles »
The Document References:
GOST 10681-75: Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST 12.4.251-2013: Occupational safety standards system. Protective clothing overalls for protection from acid solutions. Technical requiremеnts
GOST 12.4.280-2014: Occupational safety standards system. Special clothing for mechanical action protection and general industrial contamination protection. General technical requirements
GOST 12088-77: Textiles and articles. Method for the determination of air permeability
GOST 13784-94: Textile fibres and yarns. Terms and definitions
GOST 161-86: Cotton, mixed and chemical yarn fabrics. Determination of grade
GOST 18054-72: Textile. Method of determination of whiteness
GOST 18976-73: Textiles. Method for the determination of wear resistance
GOST 19616-74: Weaving and knitted fabrics. A method for evaluating the specific surface resistance
GOST 20566-75: Textile fabrics and piece-goods. Acceptance rules and sampling method
GOST 21050-2004: Textiles for overalls. Method for determination of stability to dry cleaning
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 25617-2014: Linen, semilinen, cotton and mixed fabrics and pice-goods. Methods of chemical tests
GOST 28498-90: Liquid-in-glass thermometers
GOST 29104.12-91: Industrial fabrics. Method for determination of resistance to petroleum
GOST 30084-93: Textile materials. Primary marking
GOST 30157.0-95: Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. General
GOST 30157.1-95: Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. Modes of treatments
GOST 30292-96: Textiles. Method of spray test
GOST 3811-72: Textile materials. Textile fabrics, nonwoven fabrics and piece-articles. Methods for determination of linear dimensions linear and surface density
GOST 3812-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of density of threads and pile bunches
GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension
GOST 3816-81: Textile fabrics. Methods for determination of hygroscopic and water-repelent properties
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7000-80: Textile materials. Packaging, marking, transportation and storage
GOST 8.423-81: State system for ensuring the uniformity of measurements. Mechanical stop-watches. Methods and means for verification
GOST 8737-77: Cotton from rayon yarn and mixed fabrics and piece goods. Primary packing and marking
GOST 9205-75: Cotton, mixed and chemical yarn fabrics. Widths
GOST 9733.0-83: Textiles. General requirements for test methods of colour fastness to physical and chemical actions
GOST 9733.13-83: Textiles. Test method of colour fastness to organic solvents
GOST 9733.27-83: Textiles. Test method of colour fastness to crocking
GOST 9733.3-83: Textiles. Test method of artificial light colour fastness. Xenotest
GOST 9733.4-83: Textiles. Test method of colour fastness to washing
GOST 9733.5-83: Textiles. Test method of colour fastness to distilled water
GOST 9733.6-83: Textiles. Test method of colour fastness to perspiration
GOST 9965-76: Petroleum for oil-processing plants. Specifications
GOST ISO 15025-2012: Occupational safety standards system. Protective clothing for protection against heat and flame. Method of test for limited flame spread
GOST ISO 1833-2001: Textile materials. Methods of binary fibre mixtures quantitative chemical analysis
GOST ISO 5088-2001: Textile materials. Methods of quantitative analysis of ternary fibre mixtures
GOST ISO 6330-2011: Textiles. Domestic washing and drying procedures for textile testing
GOST R EN 1149-3-2008: Occupational safety standards system. Protective clothing. Electrostatic properties. Part 3. Test methods for measurement of charge decay
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.