GOST R 57921-2017
ГОСТ Р 57921-2017
|
|
Polymer composites. Test methods. General requirements
Композиты полимерные. Методы испытаний. Общие требования
Status: Effective - Introduced for the first time. IUS 2-2018
This standard applies to polymer composites and establishes general requirements for test methods.
Настоящий стандарт распространяется на полимерные композиты и устанавливает общие требования к методам испытаний
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/8/2017
SKU: RUSS288898
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.1 Products of main chemical industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.20 Laminated sheets »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.20 Laminated Sheets »
The Document References:
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties
GOST 32656-2014: Polymer composites. Test methods. Tensile test methods
GOST 32658-2014: Polymer composites. Determination of mechanical properties in the plane of shear reinforcement by a tensile test at an angle of ± 45 degree
GOST 32794-2014: Polymer composites. Terms and definitions
GOST 33375-2015: Polymer composites. Test method for open-hole tension testing of specimens
GOST 33377-2015: Polymer composites. Test method for filled-hole tension testing of specimens
GOST 33495-2015: Polymer composites. Test method for compression after impact
GOST 33496-2015: Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST 33498-2015: Polymer composites. Test method for collapse
GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures
GOST 33598-2015: Carbon fibre. Determination of thermal oxidative resistance of carbon fibres
GOST 33599-2015: Carbon fibre. Determination of density of high-modulus carbon fibres
GOST 33685-2015: Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST 4650-2014: Plastics. Methods for the determination of water absorption
GOST 4651-2014: Plastics. Compression test method
GOST R 55134-2012: Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
GOST R 55135-2012: Plastics. Differential scanning calorimetry (DSC). Part 2. Determination of glass transition temperature
GOST R 56651-2015: Polymer composites. Method for determination of shear properties of sandwich core materials
GOST R 56652-2015: Polymer composites. Methods for determination of water absorption of core materials for sandwich constructions
GOST R 56654-2015: Polymer composites. Method for determination of density of sandwich core materials
GOST R 56658-2015: Polymer composites. Prepregs. Method for determination of resin flow of carbon fibre-epoxy prepreg
GOST R 56659-2015: Polymer composites. Prepregs. Method for determination of gel time of carbon fibre-epoxy prepreg
GOST R 56661-2015: Polymer composites. Method for determination of «sandwich» core materials’ Poisson’s Ratio
GOST R 56678-2015: Polymer composites. Method of determination of sandwich core materials’ dimensional stability
GOST R 56679-2015: Polymer composites. Method for determination of voids
GOST R 56680-2015: Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method
GOST R 56681-2015: Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST R 56682-2015: Polymer and metal composites. Method for determination the volume of matrix, reinforce filler and voids
GOST R 56724-2015: Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
GOST R 56739-2015: Polymer composites. Method for determination of water migration in sandwich construction cores
GOST R 56740-2015: Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 56754-2015: Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 56761-2015: Polymer composites. Method for determination of Barcol hardness
GOST R 56762-2015: Polymer composites. Methods for determination of moisture absorption and equilibrium conditioning
GOST R 56763-2015: Polymer composites. Method for determination of tensile strength of sandwich core materials
GOST R 56764-2015: Polymer composites. Method for measurement of thickness of sandwich construction cores
GOST R 56772-2015: Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 56774-2015: Polymer composites. Determination of two-dimensional mechanical characteristics of bending sandwich constructions subjected to a distributed load
GOST R 56782-2015: Polymer composites. Prepregs. Determination of constituent content of prepreg by Soxhlet extraction
GOST R 56783-2015: Polymer composites. Method for determination of flatwise tensile strength of sandwich constructions
GOST R 56784-2015: Polymer composites. Method for determination of flexure creep of sandwich constructions
GOST R 56785-2015: Polymer composites. Test method for tensile of flat specimens
GOST R 56786-2015: Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST R 56788-2015: Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
GOST R 56789-2015: Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST R 56790-2015: Polymer composites. Method for determination of bearing strength and bypass strength of laminates connected to one another by two bolts
GOST R 56791-2015: Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure
GOST R 56793-2015: Polymer composites. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 56794-2015: Polymer composites. Method for determination of damage resistance to concentrated quasi-static indentation force
GOST R 56796-2015: Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56797-2015: Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens
GOST R 56798-2015: Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 56799-2015: Polymer composites. Method of definition of mechanical characteristics at shear on samples with V-notched cut
GOST R 56800-2015: Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R 56801-2015: Plastics. Determination of dynamic mechanical properties. Part 1. General principles
GOST R 56805-2015: Polymer composites. Methods for determination of flexural properties
GOST R 56809-2015: Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
GOST R 56810-2015: Polymer composites. Test method for flexural flat samples
GOST R 56812-2015: Polymer composites. Method for determination of mechanical characteristics in combined loading compression
GOST R 56813-2015: Polymer composites. Guide for preparation of flat panel testing and machining
GOST R 56815-2015: Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
GOST R 56816-2015: Polymer composites. Determination of flatwise compressive properties of sandwich cores
GOST R 56818-2015: Polymer composites. Determination of chemical resistance of thermosetting resins
GOST R 57041-2016: Polymer composites. Method of determination of the characteristics of flexural curved beams
GOST R 57042-2016: Polymer composites. Method for determination of ignition loss mass of reinforced resins
GOST R 57045-2016: Polymer composites. Test method for determination of tensile properties perpendicular to reinforcement plane
GOST R 57047-2016: Polymer composites. Method for determination of the characteristics of fatigue resistance of laminates
GOST R 57048-2016: Polymer composites system for external reinforcement. Test method for determining pull-off strength from concrete substrate
GOST R 57049-2016: Polymer composites. Test method for shear fatigue of sandwich core materials
GOST R 57067-2016: Polymer composites system for external reinforcement. Test method for determining interlayer shear strength
GOST R 57143-2016: Polymer composites. Standard test method for tension-tension fatigue
GOST R 57207-2016: Polymer composites. Test method for shear properties of V-notched test samples
GOST R 57267-2016: Polymer composites system for external reinforcement. Test method for determining tensile properties
GOST R 57569-2017: Polymer composites. Test method for fatigue of samples with open hole
GOST R 57578-2017: Polymer composites. Method for determination of linear thermal expansion with a interferometry
GOST R 57685-2017: Polymer composites. Determination of tension mechanical characteristics of continuous filament carbon and graphite fiber tows
GOST R 57694-2017: Polymer composites. Method for determination of curing characteristics of thermosetting resins
GOST R 57695-2017: Polymer composites. Test methods for aging of sandwich construction under wet and warm
GOST R 57708-2017: Polymer composites. Method for determination of linear thermal expansion with a push-rod dilatometer
GOST R 57713-2017: Polymer composites. Test methods for determination of density and relative density by displacement
GOST R 57714-2017: Polymer composites. Determination of tensile creep, compressive creep and creep-rapture
GOST R 57715-2017: Polymer composites. Determination of izod impact strength
GOST R 57727-2017: Polymer composites. Determination of the nominal bearing strength under tension or compression loading
GOST R 57733-2017: Polymer composites. Test method for determination of inplane shear properties of hoop wound samples
GOST R 57734-2017: Polymer composites. Determination of impact energy to break sample
GOST R 57739-2017: Polymer composites. Determination of glass transition temperature by dynamic mechanical analysis method
GOST R 57745-2017: Polymer composites. Determination of plane shear strength of laminates by short-beam method
GOST R 57778-2017: Polymer composites. Determination of in-plane shear properties by the rail shear method
GOST R 57864-2017: Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
GOST R 57866-2017: Polymer composites. Determination of flexural properties
GOST R 57867-2017: Polymer composites. Test methods for determination of pull-through resistance
The Document is Referenced By:
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.