GOST R 57955-2017
ГОСТ Р 57955-2017
|
|
Buildings and facilities for oil and gas producing industries. Design standards
Здания и сооружения газонефтедобывающих производств. Нормы проектирования
Status: Effective - Introduced for the first time. IUS 2-2018
This standard establishes the general standards for the design of new and reconstructed buildings and structures of gas and oil producing industries. The provisions of this standard are used in the design of construction, reconstruction and overhaul of buildings and structures on hydrocarbon deposits intended to support the technological processes of its production, collection and preparation for transportation for further implementation. The provisions of this standard do not apply to the design of landfills for the disposal of industrial effluents, storage facilities and transportation of liquefied gases, marine and offshore facilities, as well as technological processes carried out in buildings and structures in accordance with their functional purpose, and technological equipment located in them
Настоящий стандарт устанавливает общие нормы проектирования новых и реконструируемых зданий и сооружений газонефтедобывающих производств. Положения настоящего стандарта применяют при проектировании строительства, реконструкции и капитального ремонта зданий и сооружений на месторождениях углеводородного сырья, предназначенных для обеспечения технологических процессов его добычи, сбора и подготовки к транспортировке с целью дальнейшей реализации. Положения настоящего стандарта не распространяются на проектирование полигонов по захоронению промышленных стоков, предприятий хранения и транспортировки сжиженных газов, морских и шельфовых объектов, а также на технологические процессы, осуществляемые в зданиях и сооружениях в соответствии с их функциональным назначением, и располагаемое в них технологическое оборудование
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/17/2017
SKU: RUSS288932
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
The Document References:
Code 136-FZ: Land Code of the Russian Federation
Code 190-FZ: Town Planning Code of the Russian Federation
Code 200-FZ: Forest Code of the Russian Federation
Code 74-FZ: Water Code of the Russian Federation
Federal Law 174-FZ: Ecological Conformity Assessment
Federal Law 256-FZ: On the safety of the fuel and energy complex
Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation
Federal Law 33-FZ: About Specially Protected Natural Areas
Federal Law 73-FZ: On objects of cultural heritage (historical and cultural monuments) of the peoples of the Russian Federation
Federal Law 7-FZ: Environmental Protection
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GN 2.2.5.2308-07: Chemical factors of production environment. Tentative safe exposure levels (TSEL) for harmful substances in the air of the working zone
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.026-2015: Occupational safety standards system. Signal colors, safety signs and marking. Purpose and rules of use. Safety colors, safety signs and signal marking. Methods of tests
GOST 17.4.2.02-83: Nature protection. Soils. Nomenclature of suitability characteristics of disturbed rich soil layer to be backfilled
GOST 17.4.3.02-85: Nature protection. Soils. Requirement for fertile layer conservation in performing earth-moving
GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions
GOST 17.5.3.04-83: Nature protection. Lands. Reclamation general requirements
GOST 17.5.3.05-84: Nature protection. Land reclamation. General requirements for lands to be backfilled
GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases
GOST 25100-2011: Soils. Classification
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents
GOST R 54195-2010: Recourses saving. Industrial production. Guidance on regarding the indices (indicators) of energy efficiency
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R EN 1363-2-2014: Fire resistance tests. Alternative and additional procedures
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 372: Regulations on the assessment of the impact of planned economic and other activities on the environment in the Russian Federation
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RD 03-14-2005: Procedure for completing a declaration of industrial safety for hazardous production facilities (dos) with a list of required information
RD 03-357-00: Methodical recommendations for declaration of industrial safety of hazardous production facilities
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
RSN 31-83: Standards of performance of engineering and geological surveys for buildings located on permafrost
RSN 67-87: Engineering survey for construction. Predicting the temperature changes in permafrost by numerical methods
SanPiN 2.1.4.1110-02: Sanitary protection zones of water sources and water pipelines for drinking use
SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects
SNiP 3.05.06-85: Electrical devices
SP 11-102-97: Engineering environmental site investigations for construction
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 124.13330.2012: Heating networks
SP 132.13330.2011: Anti-terrorist protection of buildings and constructions. General requirements.
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 18.13330.2011: Master plans for industrial enterprises
SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)
SP 20.13330.2016: Loads and actions
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2011: Buildings and structures foundations
SP 231.1311500.2015: Arrangement oil and gas fields. Fire safety requirements
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31-110-2003: Design and installation of electrical facilities of residential and public buildings. To replace VSN 59-88
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 4.13130.2013: Systems of fire protection. Restriction of fire spread at object of defense. Requirements to special layout and structural decisions
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 44.13330.2011: Administrative and residential buildings
SP 45.13330.2017: Earthworks, grounds and footings
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 52.13330.2016: Daylighting and artificial lighting
SP 56.13330.2011: Industrial buildings
SP 6.13130.2013: Systems of fire protection. Electrical equipment. Requirements of fire safety
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 89.13330.2016: Boiler installations
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VUP SNE-87: Departmental guidelines for the design of rail unloading racks of flammable and combustible liquids and liquefied hydrocarbon gases
The Document is Referenced By:
PNST 761-2023: Security in emergency situations. Safe City. Terms and definitions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.