GOST R 57991-2017
ГОСТ Р 57991-2017
|
|
Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
Магистральный трубопроводный транспорт нефти и нефтепродуктов. Сваи стальные из труб, применяемые для устройства фундаментов под опоры трубопроводов надземной прокладки. Общие технические условия
Status: Effective - Introduced for the first time. IUS 3-2018
This standard applies to steel piles of pipes intended for the installation of supports for trunk oil pipelines and oil pipelines for above-ground gaskets erected on the territory of permafrost distribution. Piles conforming to this standard can be used for building foundations of buildings and structures that are part of trunk pipelines in accordance with SP 36.13330.2012 (clause 5.9) and built in the territory of permafrost soils, including: and receiving cleaning and diagnostics tools, buildings and structures of the head and intermediate pumping stations, tank farms, loading stations, oil heating points, power lines, intended for servicing pipelines and power supply devices (including external power supply, as well as buildings and structures of substations). This standard applies to steel piles of welded longitudinal and seamless pipes with an outer diameter from 159 to 630 mm
Настоящий стандарт распространяется на стальные сваи из труб, предназначенные для устройства опор магистральных нефтепроводов и нефтепродуктопроводов надземной прокладки, возводимых на территории распространения многолетнемерзлых грунтов. Сваи, соответствующие настоящему стандарту, допускается применять для устройства фундаментов зданий и сооружений, входящих в состав магистральных трубопроводов согласно СП 36.13330.2012 (пункт 5.9) и возводимых на территории распространения многолетнемерзлых грунтов, в том числе: -опор трубопроводов подземной прокладки, -узлов пуска и приема средств очистки и диагностирования, -зданий и сооружений головных и промежуточных НПС, резервуарных парков, наливных станций, пунктов подогрева нефти, -линий электропередачи, предназначенных для обслуживания трубопроводов и устройства электроснабжения (в т. ч. внешнего электроснабжения, а также зданий и сооружений подстанций). Настоящий стандарт распространяется на стальные сваи из сварных прямошовных и бесшовных труб наружным диаметром от 159 до 630 мм
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/24/2017
SKU: RUSS288967
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Construction (Max) »
Standards »
Other state standards used in construction »
93 Civil Engineering »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 162-90: Depth gauges. Specifications
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 19281-2014: High strength rolled steel. General specification
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28548-90: Steel tubes. Terms and definitions
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 31458-2015: Steel and cast iron pipes and fittings. Inspection documents
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-87: Seamless hot-rolled steel tubes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9.008-82: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 977-88: Steel castings. General specifications
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 57512-2017: Trunk pipeline transport of oil and oil products. Terms and definitions
PB 03-273-99: Rules for qualification test of welders and welding production specialists
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
Resolution 390: Fire safety rules in the Russian Federation
SP 16.13330.2017: Steel structures
SP 24.13330.2011: Pile foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 36.13330.2012: Trunk pipelines
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading
GOST 34826-2022: Trunk pipeline transport of oil and petroleum products. Linear part. Organization and production of construction and installation works
GOST R 9.404-2022: Unified system of protection against corrosion and aging (USPCS). Protective organic coatings. Coating systems based on polyethylene powder compositions. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.