GOST R 57992-2017
ГОСТ Р 57992-2017
|
|
Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications
Магистральный трубопроводный транспорт нефти и нефтепродуктов. Устройства балластирующие чугунные. Общие технические условия
Status: Effective - Introduced for the first time. IUS 3-2018
This standard establishes the characteristics of cast-iron ballasting devices (hereinafter referred to as CBU) designed to ensure the stable position of trunk oil pipelines and oil product pipelines (hereinafter pipeline) at design elevations when they are laid at underwater crossings, waterlogged or watered areas, the basic rules for their implementation and characteristics of their processes manufacturing, acceptance, operation. This standard applies to BSU for pipelines with a working pressure not exceeding 10 MPa and with a diameter of 219 to 1220 mm, as well as for pipelines with a diameter of 820, 1020, 1067 and 1220 mm with ballasting devices installed over a thermal insulation coating of 100 or 200 mm thick. mm This standard does not apply to BSU for pipelines crossing offshore
Настоящий стандарт устанавливает характеристики чугунных балластирующих устройств (далее-ЧБУ), предназначенных для обеспечения устойчивого положения магистральных нефтепроводов и нефтепродуктопроводов (далее-трубопровод), на проектных отметках при их прокладке на подводных переходах, заболоченных или обводненных участках, основные правила осуществления и характеристики процессов их изготовления, приемки, эксплуатации. Настоящий стандарт распространяется на ЧБУ для трубопроводов с рабочим давлением не выше 10 МПа и диаметром от 219 до 1220 мм, а также для трубопроводов диаметром 820, 1020, 1067 и 1220 мм с балластирующими устройствами, установленными поверх нанесенного на трубопровод теплоизоляционного покрытия толщиной 100 или 200 мм. Настоящий стандарт не распространяется на ЧБУ для трубопроводов, пересекающих морские акватории
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/24/2017
SKU: RUSS288968
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.01 Air quality in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.01 Air quality in general »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
The Document References:
GOST 11371-78: Washers. Specifications
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13682-80: Width across flats. Dimensions
GOST 13837-79: General purpose dynamometers
GOST 1412-85: Flakish graphite cast iron
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 2.601-95: Operational documents
GOST 23677-79: Hardness meters for metals
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24648-90: Pig iron for castings. Sampling and making the specimen for mechanical testing.
GOST 25706-83: Magnifiers
GOST 26358-84: Pig iron castings
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 27208-87: Cast iron casting. Methods of mechanical testing
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.