GOST R 58018-2017
ГОСТ Р 58018-2017
|
|
Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
Опоры промежуточные композитные полимерные для воздушных линий электропередачи напряжением 35-220 кВ. Общие техничсекие условия
Status: Effective - Introduced for the first time. IUS 3-2018
This standard applies to intermediate composite polymer supports for overhead transmission lines of voltage class from 35 to 220 kV, developed after November 1, 2018. The standard establishes requirements and test methods for both the supports and the materials from which they are made.
Настоящий стандарт распространяются на промежуточные композитные полимерные опоры для воздушных линий электропередачи класса напряжения от 35 до 220 кВ, разработанные после 1-го ноября 2018 г. Стандарт устанавливает требования и методы испытаний как непосредственно к опорам, так и к материалам, из которых они изготовлены
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/5/2017
SKU: RUSS288994
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
The Document References:
GOST 1033-79: Fatty cup grease. Specifications
GOST 11371-78: Washers. Specifications
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 2246-70: Welding steel wire. Specifications
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 28856-90: Line suspension polymeric rod insulators
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 30402-96: Building materials Ignitability Test Meth
GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 32588-2013: Polymer composites. List of characteristics
GOST 32656-2017: Polymer composites. Test methods. Tensile tests
GOST 32794-2014: Polymer composites. Terms and definitions
GOST 33742-2016: Polymer composites. Classification
GOST 4651-2014: Plastics. Compression test method
GOST 515-77: Bitumized and tarred packaging paper
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6490-93: Suspended line disk insulators
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 51801-2001: General requirements for machines, instruments and other industrial products as to chemically active and other special media endurance
GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications
GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 55189-2012: Line suspension polymeric rod insulators. General specifications
GOST R 56206-2014: Polymer composites. Methods for assessing the fire hazard and fire limits
GOST R 56810-2015: Polymer composites. Test method for flexural flat samples
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 16.13330.2011: Steel structures
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.