imgalt

GOST R 58021-2017

ГОСТ Р 58021-2017

Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications

Опоры композитные полимерные для воздушных линий электропередачи напряжением 6-20 кВ. Общие технические условия

Status: Effective - Introduced for the first time. IUS 3-2018

This standard applies to single-chain and double-chain composite polymer supports (hereinafter referred to as supports) for overhead lines (OHTL) of electricity transmission of voltage class from 6 to 20 kV, developed after November 1, 2018. The standard establishes requirements for both directly supports and from which they are made, and their test methods

Настоящий стандарт распространяются на одноцепные и двухцепные композитные полимерные опоры (далее-опоры) для воздушных линий (ВЛ) электропередачи класса напряжения от 6 до 20 кВ, разработанные после 1 ноября 2018 г. Стандарт устанавливает требования как непосредственно к опорам, так и к материалам, из которых они изготовлены, и методы их испытаний

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/12/2017

SKU: RUSS288997

Price: $414.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.120 Reinforced plastics »


The Document References:

GOST 1033-79: Fatty cup grease. Specifications

GOST 11371-78: Washers. Specifications

GOST 14192-96: Cargo marking

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 2246-70: Welding steel wire. Specifications

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 28856-90: Line suspension polymeric rod insulators

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements

GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions

GOST 30402-96: Building materials Ignitability Test Meth

GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability

GOST 30630.3.2-2013: Methods for determining the resistance of polymeric insulating materials and systems through the accelerated tests in aggressive gaseous media. General requirements. Testing materials and insulation systems for low-voltage electrical products

GOST 32588-2013: Polymer composites. List of characteristics

GOST 32656-2017: Polymer composites. Test methods. Tensile tests

GOST 32794-2014: Polymer composites. Terms and definitions

GOST 33742-2016: Polymer composites. Classification

GOST 4651-2014: Plastics. Compression test method

GOST 515-77: Bitumized and tarred packaging paper

GOST 6267-74: Grease ЦИАТИМ-201. Specifications

GOST 6490-2017: Line suspension disk insulators. General specifications

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation

GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B

GOST R 51801-2001: General requirements for machines, instruments and other industrial products as to chemically active and other special media endurance

GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications

GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.

GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications

GOST R 55189-2012: Line suspension polymeric rod insulators. General specifications

GOST R 56206-2014: Polymer composites. Methods for assessing the fire hazard and fire limits

GOST R 56810-2015: Polymer composites. Test method for flexural flat samples

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

PUE 204: Electrical Installation Rules (PUE). Chapter 7.5 Electrothermal Installations (Seventh Edition)

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2011: Steel structures

SP 16.13330.2017: Steel structures

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!