imgalt

GOST R 60.2.2.1-2016

ГОСТ Р 60.2.2.1-2016

Robots and robotic devices. Safety requirements for personal care robots

Роботы и робототехнические устройства. Требования по безопасности для роботов по персональному уходу

Status: Effective - Introduced for the first time. IUS 6-2017

This standard defines the requirements and recommendations for the design of robots with integrated security, protection measures and information for the use of robots for personal care, in particular for the following three types of robots for personal care: - mobile serving robot; -about for the provision of physical assistance; -robot for transporting a person. These robots usually perform tasks to improve the quality of life of intended users, regardless of their age and abilities. This standard describes the hazards associated with the use of such robots and establishes requirements to eliminate or reduce the risks associated with these hazards to an acceptable level. This standard covers applications related to physical contact between humans and robots. This standard presents significant hazards and describes how to overcome them for each type of personal care robot. This standard covers robotic devices used for personal care, which are personal care robots. The scope of this standard is limited to ground robots. This standard does not apply to: -bots moving at speeds in excess of 20 km

Настоящий стандарт определяет требования и рекомендации для проектирования роботов со встроенной безопасностью, мер защиты и информации для использования роботов по персональному уходу, в частности для следующих трех типов роботов по персональному уходу: -мобильный обслуживающий робот; -робот для оказания физической помощи; -робот для перевозки человека. Эти роботы обычно выполняют задачи по улучшению качества жизни предполагаемых пользователей независимо от их возраста и способностей. Настоящий стандарт описывает опасности, связанные с использованием таких роботов и устанавливает требования для устранения или снижения рисков, связанных с данными опасностями до приемлемого уровня. Настоящий стандарт охватывает применения, связанные с физическим контактом между человеком и роботом. Настоящий стандарт представляет существенные опасности и описывает как их преодолевать для каждого типа робота по персональному уходу. Настоящий стандарт охватывает робототехнические устройства, используемые для персонального ухода, которые относятся к роботам по персональному уходу. Область применения настоящего стандарта ограничена наземными роботами. Настоящий стандарт не применим к: -роботам, перемещающимся со скоростью свыше 20 км/час; -роботам-игрушкам; -морским роботам и летающим роботам; -промышленным роботам, к которым относится ISO 10218; -роботам, используемым в качестве медицинских устройств; -роботам для военных или полицейских применений. Настоящий стандарт не применим к роботам, изготовленным до даты его публикации

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/24/2016

SKU: RUSS289055

Price: $1,333.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.040 Industrial automated systems » 25.040.30 Industrial robots. Manipulators »

National standards » 25 MECHANICAL ENGINEERING » 25.040 Industrial automated systems » 25.040.30 Industrial robots. Manipulators »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.040 Industrial automated systems » 25.040.40 Measurement and control of production process »

National standards » 25 MECHANICAL ENGINEERING » 25.040 Industrial automated systems » 25.040.40 Measurement and control of production process »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P8 Computing facilities and automated control systems » P87 Automated Control Systems »


The Document References:

GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values

GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ

GOST IEC 60335-2-29-2012: Safety of household and similar electrical appliances. Part 2-29. Particular requirements for battery chargers

GOST ISO 13855-2006: Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body

GOST ISO 13857-2012: Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs

GOST ISO 3864-1-2013: Graphic symbols. Safety colours and safety signs. Part 1. Design principles for safety signs and safety markings

GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements

GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up

GOST R 54125-2010: Safety of machinery and equipment. Principles for safety ensuring while designing

GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements

GOST R IEC 62061-2013: Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems

GOST R IEC 62471-2013: Lamps and lamp systems. Photobiological safety

GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design

GOST R ISO 15534-1-2009: Ergonomic design for the safety of machinery. Part 1. Principles for determining the dimensions required for openings for whole-body access into machinery

GOST R ISO 15534-2-2016: Ergonomic design for the safety of machinery. Part 2. Principles for determining the dimensions of access openings

GOST R ISO 15534-3-2007: Ergonomic design for the safety of machinery. Part 3. Anthropometric data

GOST R ISO 3746-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane

GOST R ISO 8373-2014: Robots and robotic devices. Vocabulary

The Document is Referenced By:

GOST R 60.0.0.5-2019: Robots and robotic devices. Mobile robots. Terms and Definitions

GOST R 60.2.0.1-2022: (ISO 22166-1:2021) Robots and robotic devices. Modular principle of construction of service robots. Part 1. General requirements

GOST R 60.2.2.4-2023: Robots and robotic devices. Medical electrical products. Particular safety requirements taking into account the basic functional characteristics of medical robots for rehabilitation, condition assessment, compensation or relief

GOST R 60.2.3.1-2021: Robots and robotic devices. Personal care service robots. Safety test methods in accordance with the requirements of GOST R 60.2.2.1-2016

GOST R 60.2.3.2-2022: Robots and robotic devices. Service robots for personal care. Guidelines for application of GOST R 60.2.2.1-2016

GOST R 60.5.3.1-2022: ISO 18646-4:2021 Robots and robotic devices. Operating characteristics and appropriate test methods for service robots. Part 4. Robots for lumbar support

GOST R 60.6.3.14-2019: Robots and robotic devices. Performance and associated test methods for service mobile robots. Part 1. Movement of wheeled robots

GOST R 70514-2022: Electrical means of personal mobility. Technical requirements and test methods

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!