imgalt

GOST R 8.923-2016

ГОСТ Р 8.923-2016

State system for ensuring the uniformity of measurements. Gas generators vapor ethanol in the air. Verification procedure

Государственная система обеспечения единства измерений. Генераторы газовых смесей паров этанола в воздухе. Методика поверки

Status: Effective - Introduced for the first time. IUS 2-2017

The standard applies to the headsets of electric drives for arrows without external locking devices, headsets of electric drives with external locking devices for arrows and crosses with moving elements, external locking devices for arrows and crosses with moving elements intended for operation on public and non-public railway tracks. The standard is used in the development, design, manufacture and testing of headsets and external contactors in order to assess their compliance with safety requirements.

Стандарт распространяется на генераторы газовых смесей паров этанола в воздухе (далее-генераторы)-рабочие эталоны 1 и 2 разряда по ГОСТ 8.578, предназначенные для приготовления газовых смесей, используемых при проведении поверки и испытаний анализаторов паров этанола в выдыхаемом воздухе, в том числе в целях утверждения типа средств измерений, и устанавливает методику их первичной и периодической поверок. Настоящий стандарт распространяется на генераторы, основанные на методе барботирования воздуха через водный раствор этанола, термостатированный при номинальной температуре 34 °С и имеющие следующие метрологические характеристики:-диапазон воспроизведения массовой концентрации этанола в газовых смесях: нижняя граница, мг/м3 от 40 до 100; верхняя граница, мг/м3 от 1000 до 2000;-пределы допускаемой погрешности воспроизведения массовой концентрации этанола в газовых смесях (в зависимости от того, что больше): абсолютной, мг/м3 ± 4 или более; относительной, % ± 2,5 или более. Интервал между поверками генераторов устанавливают при утверждении типа средств измерений (далее-СИ) и указывают в свидетельстве об утверждении типа СИ. При проведении испытаний в целях утверждения типа СИ допускается разрабатывать методики поверки, распространяющие на конкретный тип генераторов, не противоречащие настоящему стандарту

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/1/2016

SKU: RUSS289097

Price: $300.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 2 Technical basics of metrological support » 2.3 Verification, calibration and testing of measuring instruments » 2.3.5 Measurements of physico-chemical composition and properties of substances »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »


The Document References:

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 13045-81: Rota meters

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 6709-72: Distilled water. Specifications

GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST R ISO 7886-1-2009: Sterile hypodermic syringes for single use. Part 1. Syringes for manual use

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate

R 50.2.077-2014: State system for ensuring the uniformity of measurements. Pattern evaluations of a measuring instrument for pattern approval. Software validation for protection assurance

TU 25-1894.003-90: Mechanical stopwatches

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!