imgalt

MU 2.6.5.033-2017

МУ 2.6.5.033-2017

Organization of ventilation at radiation-hazardous enterprises (production facilities) of State Corporation 'Rosatom'

Организация вентиляции на радиационно опасных предприятиях (производствах) Госкорпорации "Росатом"

Status: Valid - Supersedes

Guidelines are intended for use in the design, installation, commissioning, reconstruction and operation of ventilation, air heating and gas cleaning at radiation hazardous enterprises (production) controlled by the State Atomic Energy Corporation "Rosato

Методические указания предназначены для применения при проектировании, монтаже, пуско-наладочных работах, реконструкции и эксплуатации вентиляции, воздушного отопления и газоочистки на радиационно опасных предприятиях (производствах), подконтрольных Госуд

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Chief State Sanitary Doctor of the FMBA of Russia, 5/5/2017

SKU: RUSS291176

Price: $757.00

imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 6 Protection against electromagnetic radiation » 6.2 Ionizing radiation »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.280 Protection against radiation »


As a Replacement Of:

MU 2.2.8/2.6.1.67-02: Organization of ventilation at radiation facilities

The Document References:

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GN 2.2.5.2308-07: Chemical factors of production environment. Tentative safe exposure levels (TSEL) for harmful substances in the air of the working zone

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.016-79: Work area air

GOST 12.3.018-79: Occupational safety standards system. Ventilation system. Aerodynamical test methods

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.248-2013: Occupational safety standards system. Additional respiratory personal protective equipment for works with radioactive and chemically toxic substances. General requirements and test methods

GOST 17.2.1.04-77: Nature protection. Atmosphere. Sources and meteorological factors of pollution, industrial emissions. Terms and definitions

GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 20716-75: Radiation processing plants. Terms and definitions

GOST 21.602-2003: System of design documents for construction. Rules for execution of working documentation of heating, ventilation and air conditioning

GOST 22270-76: Equipment for air conditioning, ventilation and heating. Terms and definitions

GOST 25199-82: Dust collecting equipment. Terms and definitions

GOST EN 12942-2012: Occupational safety standards system. Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. General technical requirements. Test methods. Marking

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 21.1001-2009: System of design documents for construction. General principles

GOST R 54578-2011: Workplace air quality. Predominantly fibrogenic aerosols. General principles for hygienic regulation, monitoring and evaluation

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R ISO 14644-4-2002: Cleanrooms and associated controlled environments. Part 4. Design, construction and start-up

GOST R ISO 16200-1-2007: Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

GOST R ISO 7730-2009: Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

GOST R ISO 9096-2006: Stationary source emissions. Manual determination of mass concentration of particulate matter

Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units

Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire

Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings

Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks

Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.

Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building

Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.

Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises

Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems

Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems

Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection

Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air

Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings

Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems

MU 2.2.8/2.6.1.67-02: Organization of ventilation at radiation facilities

MU 2.6.1.044-08: Establishing a class of work when dealing with open sources of ionizing radiation

MU 2.6.1.2005-05: Identification of the potential hazard category of a radiation facility

MU 4425-87: Sanitary and hygienic control of ventilation systems of production areas

R 2.2.2006-05: Guide on Hygienic Assessment of Factors of Working Environment and Work Load. Criteria and Classification of Working Conditions

RMG 61-2010: State system for ensuring the uniformity of measurements. Indicators of precision and accuracy of the quantitative chemical analysis techniques. Methods for evaluation

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas

SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects

SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate

SanPiN 2.2.8.47-03: Insulating suits for protection against radioactive and chemically toxic substances

SanPiN 2.2.8.48-03: Personal respiratory protection equipment for radiation and chemical hazardous production personnel

SanPiN 2.6.1.07-03: Hygienic requirements for design of enterprises and facilities of nuclear industry

SanPiN 2.6.1.2523-09: Norms of radiation safety

SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures

SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises

SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument

SP 2.6.1.2612-10: Basic sanitary rules for radiation safety

SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003

SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements

SP 73.13330.2016: Internal sanitary-technical systems

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!