MUK 4.1.017-11
МУК 4.1.017-11
|
|
Methods of measuring the mass concentration of nitrosodimethylamine in the air of the working area by the photometric method
Методика измерений массовой концентрации нитрозодиметиламина в воздухе рабочей зоны фотометрическим методом
Status: Valid - Supersedes
Guidelines establish a photometric method for measuring the mass concentration of nitrosodimethylamine in one-time samples of working area air in the concentration range (0.005-0.1) mg
Методические указания устанавливают фотометрическую методику измерений массовой концентрации нитрозодиметиламина в разовых пробах воздуха рабочей зоны в диапазоне концентраций (0,005-0,1) мг/м3.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Chief State Sanitary Doctor of Russia,
3/24/2011
SKU: RUSS291583
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of State Committee for Sanitary and Epidemiological Supervision and Ministry of Health of Russian Federation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.3 Requirements for quality of atmospheric air of industrial facilities and industries »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.1 Hygienic regulation of microclimate parameters and content of harmful substances in air of working area »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.30 Atmosphere of working area »
The Document is Replaced With:
MUK 4.1.060-16: Methods for measuring the mass concentration of nitrosodimethylamine in workplace air using the photometric method
As a Replacement Of:
MUK 4.1.014-04: Nitrosodimethylamine. Photocolorimetric determination of the mass concentration in the air of industrial premises. Measurement Technique
The Document References:
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.016-79: Work area air
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.4.007-74: Occupational safety standards system. Personal protective means for respiratory system. Method for determination of breath air temperature
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17435-72: Drawing rulers. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19710-83: Ethylene glycol. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3956-76: Silica gel technical. Technical conditions
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4658-73: Mercury. Specifications
GOST 5556-81: Medical absorbent cotton
GOST 5777-84: Potassium permanganate technical. Technical conditions
GOST 61-75: Reagents. Acetic acid. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 1.5-92: State system for standardization of the Russian Federation. General requirements for lay-out, formulation, presentation and contents of standards
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
R 1.1.002-96: Classification of normative and methodological documents of the system of state sanitary and epidemiological regulation
R 1.1.003-96: General Requirements for the Composition, Style, and Format of Standards of the National Sanitation and Disease Control Standardization System
RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
