imgalt

MUK 4.1.3166-14

МУК 4.1.3166-14

Gas chromatographic determination of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, isopropanol, acrylonitrile, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, benzene, toluene, ethyl benzene, m-o, and

Газохроматографическое определение гексана, гептана, ацетальдегида, ацетона, метилацетата, этилацетата, метанола, изопропанола, акрилонитрила, н-пропанола, н-пропилацетата, бутилацетата, изобутанола, н-бутанола, бензола, толуола, этилбензола, м-, о- и п-к

Status: Effective

Guidelines regulate the procedure for applying the method of capillary gas chromatography to determine the content of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, isopropanol, acrylonitrile, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, benzene, toluene, ethylbenzene, m-, o- and p-xylenes, isopropylbenzene, styrene, alpha-methylstyrene in the water of drinking water supply, water packaged in a container, and water extracts from materials of different composition in the concentration range ations: 0.005 - 0.1 mg

Методические указания регулируют порядок применения метода капиллярной газовой хроматографии для определения содержания гексана, гептана, ацетальдегида, ацетона, метилатцетата, этилацетата, метанола, изопропанола, акрилонитрила, н-пропанола, н-пропилацетата, бутилацетата, изобутанола, н-бутанола, бензола, толуола, этилбензола, м-, о- и п-ксилолов, изопропилбензола, стирола, альфа-метилстирола в воде хозяйственно-питьевого водоснабжения, воде, расфасованной в емкости, и водных вытяжках из материалов различного состава в диапазоне концентраций: 0,005 - 0,1 мг/дм3 для ароматических углеводородов, гексана, гептана, 0,0 1 - 0,1 мг/дм3 для акрилонитрила и 0,05 - 1,0 мг/дм3 для кислородсодержащих соединений. Методические указания носят рекомендательный характер.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Head of the Federal Service for Supervision of Consumer Rights Protection and Human Well-being, Chief State Sanitary Doctor of the Russian Federation, 6/16/2014

SKU: RUSS291601

Price: $225.72



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 007/2011 TR CU. On safety of products intended for children and adolescents » Regulations and standards (to TR CU 007/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 019/2011 TR CU. On safety of personal protective equipment » Regulations and standards (to ТР ТС 019/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 042/2017 TR EAEU. On safety of equipment for children's playgrounds » Regulations and standards (to 042/2017 TR CU) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » V Social Security » 1 Requirements of sanitary and epidemiological regulation » 1.1 General requirements of sanitary-epidemiological regulation »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 2 Protection and protection of surface water bodies » 2.2 Rationing impact on water bodies » 2.2.1 Rationing of quality of water bodies » 2.2.1.1 General requirements for composition and properties of surface waters »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.120 Home Safety »


As a Replacement Of:

MR 01.024-07: Gas chromatographic definition of hexane, heptane, ethyl aldehyde, dimethyl ketone, methyl acetate, ethyl acetate, methylic alcohol, isopropyl alcohol, cyanoethylene, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, phenyl hydride, methyl benzene, ethylbenzene, m-, o- and p-dimethylbenzene, isopropylbenzene, styrene, alphamethylstyrene in water extracts of different composition materials

The Document References:

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GN 2.2.5.2308-07: Chemical factors of production environment. Tentative safe exposure levels (TSEL) for harmful substances in the air of the working zone

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 22967-90: Injection medical syringes of repeated application. General technical requirements and test methods

GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements

GOST 4166-76: Reagents. Sodium sulphate. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 9585-77: Acetaldehyde technical. Specifications

GOST OIML R 111-1-2009: State system for ensuring the uniformity of measurement. Weights of accuracy classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1 Metrological and technical requirements.

GOST R 51592-2000: Water. General requirements for sampling

GOST R 51593-2000: Drinking water. Sampling

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

PB 03-576-03: Regulations of design and safe operation of pressure vessels

The Document is Referenced By:

Decision 170: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Eurasian Economic Union "On the safety of equipment for children's playgrounds" (TR EAEU 042/2017), as well as interstate standards, containing the rules and methods of research (testing) and measurements, including the rules for sampling, necessary for the application and implementation of the requirements of the technical regulation of Evraz Iy Economic Union "On the safety of equipment for children's playgrounds" (TR EAEU 042/2017) and the assessment of conformity of objects of technical regulation

Decision 180: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of light industry products" (TR CU 017/2011) , and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and implementation of the requirements of the technical regulations of the Customs Union "On the safety of light industry products" (TR CU 017/2011) and the implementation of conformity assessment of objects of technical regulation

Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)

Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including

Decision 31: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, through the application of which on a voluntary basis compliance with the requirements of the technical regulations of the Customs Union "On safety of products designed for children and adolescents" (TR CU 007/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and the

Decision 31: On amendments to the technical regulation of the Customs Union "On safety of railway transport infrastructure" (TR CU 003/2011)

GOST 34901-2022: Medical devices. System for evaluation of biological effect. General requirements for research (tests)

MR 1.2.0134-18: The procedure for the selection of samples (samples) of toys and products intended for children and adolescents, the organization of their testing (research) and evaluation, data reporting in order to ensure state supervision in the field of ensuring the quality and safety of non-food products

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!