ODM 218.3.060-2015

ОДМ 218.3.060-2015

Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

Методические рекомендации по ремонту дорожных одежд, состоящих из цементобетонных покрытий, перекрытых асфальтобетонными слоями, на автомобильных дорогах общего пользования

Status: Effective - Introduced for the first time. Does not have an official publication

Guidelines contain the basic methods of repair and overhaul of pavements consisting of cement concrete and asphalt concrete layers, as well as issues of quality control of repair work. The methodological recommendations consider methods for restoring the transport and operational status of pavements and the necessary technological equipment.

Методические рекомендации содержат основные методы ремонта и капитального ремонта дорожных одежд, состоящих из цементобетонных и асфальтобетонных слоев, а также вопросы контроля качества ремонтных работ. В методических рекомендациях рассмотрены методы восстановления транспортно-эксплуатационного состояния дорожных одежд и необходимое технологическое оборудование.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 109

Approved: Federal Highway Agency, 2/15/2016

SKU: RUSS292150

Price: $716.83

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of roads »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 1 Basic requirements for quality of products and services »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.10 Road construction »

The Document References:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10585-2013: Petroleum fuel. Mazut. Specifications

GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand

GOST 11955-82: Road petroleum liquid bitumen. Specifications

GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods

GOST 166-89: Vernier callipers. Specifications

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 25607-2009: Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 30412-96: Road roads and airfields. Methods for measuring base irregularities and coatings

GOST 30740-2000: Sealing materials used in joints of aerodrome coats. General specifications

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 32703-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Technical requirements

GOST 32825-2014: Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages

GOST 32870-2014: Automobile roads of general use. Bituminous mastics. Technical requirements

GOST 32872-2014: Automobile roads of general use. Bituminous sealants. Technical requirements

GOST 33133-2014: Automobile roads of general use. Viscous road petroleum bitumens. Technical requirements

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8736-2014: Sand for construction works. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General

GOST R 50597-93: Automobile roads and streets. The requirements to the level of maintenance. Satisfied the traffic safety

GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications

GOST R 52128-2003: Bitumen road emulsions. Specifications

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 52368-2005: Diesel fuel EVRO. Specifications

GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements

GOST R 55028-2012: Public roads and highways. Geosynthetic for road construction. Classification, terms and definitions

ODM 218.1.001-2010: Recommendations for the development and application of technical regulation documents in the field of road facilities

ODM 218.1.002-2010: Recommendations for the organization and conduct of work on standardization in the road sector

ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures

ODM 218.3.013-2011: Guidelines for the use of bitumen emulsions when arranging protective layers of wear from cast emulsion-mineral mixtures

ODM 218.3.025-2012: Technology of repair and reconstruction of roads using method of cement concrete pavement fragmentation by action of shock-rotational mechanism

ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads

ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces

ODM 218.4.005-2010: Recommendations for the safety of traffic on highways

ODM 218.5.001-2008: Recommendations on joint cutting in base layers of asphalt pavements

ODM 218.5.001-2009: Guidelines for the use of geogrids and flat geogrids for the reinforcement of asphalt concrete layers of improved types of coatings for the overhaul and repair of roads

ODM 218.5.003-2010: Recommendations for the use of geosynthetic materials in the construction and repair of roads

ODM 218.6.014-2014: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites

ODN 218.0.006-2002: Requirements on Diagnostics and Assessment of the Condition of Roads and Highways

ODN 218.046-01: Design of non-rigid pavement

ODN 218.1.052-2002: Strength Assessment of Flexible Paving

OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications

PNST 1-2012: Automobile roads of general use. Viscous petroleum road bitumens. Specifications

PNST 2-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the tensile properties of modified bitumen by the force ductility method

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SP 78.13330.2012: Automobile roads

STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)

TR 171-06: Technical recommendations on the composition and technology of pavement repair using cold bitumen-mineral mixtures (cold asphalt)

VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements

VSN 24-88: Technical Guidelines for Road Repair and Maintenance

VSN 37-84: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites

VSN 49-86: Guidelines for the Improvement of Load-Bearing Capacity of Roadbeds and Road Pavements Constructed with the Use of Synthetic Materials

Federal Law 184-FZ: About technical regulation

Manual for SNiP 3.06.03-85: Manual for surface treatment on roads

Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88

Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions

Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $106.92
High strength rolled steel. General specification
Language: English
Price: $144.54
Cable products. Requirements of fire safety.
Language: English
Price: $90.09
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Seamless steel pipes for boiler plants and pipelines
Language: English
Price: $408.80
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Steel structures
Language: English
Price: $297.00
Loads and actions
Language: English
Price: $495.00
Structural steel structure rolled products. General specifications
Language: English
Price: $120.78
Mechanical reinforcement connections for reinforced concrete structures. Test methods
Language: English
Price: $218.25
Mechanical reinforcement couplers for reinforced concrete structures. Specifications
Language: English
Price: $165.87
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $307.89
Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
Language: English
Price: $334.65
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Mixtures classification of hazard for health
Language: English
Price: $121.77
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
Language: English
Price: $524.70


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!