ODM 218.3.087-2017
ОДМ 218.3.087-2017
|
|
Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
Рекомендации по применению асфальтобетонных смесей на основе металлургических шлаковых материалов для условий Центрального федерального округа
Status: Effective - Introduced for the first time. Does not have an official publication
Industry road methodical document applies to asphalt concrete mixes and asphalt concrete prepared using metallurgical slag materials: crushed stone from blast furnace slags (acidic and basic), granulated blast furnace slags, slag sands (fraction from 0 to 5 mm of crushing of blast furnace slags into fractionated crushed stone), slag stone sands (fraction from 0 to 5 mm, crushing slag pumice) and rubble from steelmaking slags. The requirements of these recommendations are intended for use by organizations involved in the design, construction, acceptance diagnostics and quality control of the construction of roads in the Central Federal District. Can also be used by the road authorities of the Federal Highway Agency. In other cases, the recommendations can be used at the discretion of the road authorities of the constituent entities of the Russian Federation.
Отраслевой дорожный методический документ распространяется на асфальтобетонные смеси и асфальтобетон, приготовленные с применением металлургических шлаковых материалов: щебня из доменных шлаков (кислых и основных), гранулированных доменных шлаков, шлаковых песков (фракция от 0 до 5 мм дробления доменных шлаков на фракционированный щебень), шлакопемзовых песков (фракция от 0 до 5 мм, дробления шлаковой пемзы) и щебня из сталеплавильных шлаков. Требования настоящих рекомендаций предназначены для применения организациями, занимающимися проектированием, строительством, приемочной диагностикой и контролем качества строительства автомобильных дорог Центрального федерального округа. Так же могут быть использованы органами управления дорожного хозяйства Федерального дорожного агентства. В остальных случаях рекомендации могут использоваться по усмотрению органов управления автомобильными дорогами субъектов Российской Федерации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Highway Agency,
4/20/2017
SKU: RUSS292161
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
The Document References:
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-65: Petroleum bitumen. Method for the determination of viscosity
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 32496-2013: Fillers porous for light concrete. Specifications
GOST 32703-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Technical requirements
GOST 32730-2014: Automobile roads of general use. Crushed sand. Specifications
GOST 32761-2014: Automobile roads of general use. Mineral powder. Technical requirements
GOST 32824-2014: Automobile roads of general use. Natural sand. Technical requirements
GOST 32826-2014: Automobile roads of general use. Slag ruble and sand. Technical requirements
GOST 33133-2014: Automobile roads of general use. Viscous road petroleum bitumens. Technical requirements
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
ODN 218.046-01: Design of non-rigid pavement
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 78.13330.2012: Automobile roads
VSN 8-89: Instruction for nature conservation in road construction, repair and maintenance
The Document is Referenced By:
Directive 1414-r: On the invalidation of industry road methodological documents
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.