ODM 218.3.095-2017
ОДМ 218.3.095-2017
|
|
Corrosion protection of concrete and reinforced concrete structures of transport facilities
Защита от коррозии бетонных и железобетонных конструкций транспортных сооружений
Status: Effective - Introduced for the first time
ODM is intended for use by the federal administrations of highways, motorway administrations, interregional directorates for the construction of federal roads, as well as design, survey, construction, maintenance organizations involved in the design, construction, maintenance, inspection, repair, overhaul, reconstruction of transport facilities on highways of federal value. The recommendations are aimed at ensuring road safety, protection of life and health of citizens, property of individuals and legal entities, state and municipal property, environmental protection. ODM contains requirements that must be taken into account when developing corrosion protection measures for concrete and reinforced concrete structures of transport facilities operating in environments with varying degrees of aggressiveness with temperatures ranging from minus 50 degrees Celsius to plus 50 degrees Celsius
ОДМ предназначен для применения федеральными управлениями автомобильных дорог, управлениями автомагистралей, межрегиональными дирекциями по дорожному строительству автомобильных дорог федерального значения, а также проектными, обследовательскими, строительными, эксплуатирующими организациями, занимающимися проектированием, строительством, содержанием, обследованием, ремонтом, капитальным ремонтом, реконструкцией транспортных сооружений на автомобильных дорогах федерального значения. Рекомендации направлены на обеспечение безопасности дорожного движения, защиту жизни и здоровья граждан, имущества физических и юридических лиц, государственного и муниципального имущества, охрану окружающей среды. ОДМ содержит требования, которые должны учитываться при разработке мер защиты от коррозии бетонных и железобетонных конструкций транспортных сооружений, работающих в средах с различной степенью агрессивности с температурой от минус 50 градусов Цельсия до плюс 50 градусов Цельсия
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Road Agency Rosavtodor,
6/28/2017
SKU: RUSS292168
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GOST 10054-82: Water-resistant abrasive paper
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.3.005-75: Painting works
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.029-76: Special aprons
GOST 12.4.034-2001: Individual respiratory protective devices
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12.4.244-2013: Occupational safety standards system. Respiratory protective devices. Half masks and quarter masks from isolating. General specifications
GOST 12.4.245-2013: Occupational safety standards system. Respiratory protective devices. Gas filters and combined filters. General specifications
GOST 12.4.253-2013: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST 12.4.294-2015: Occupational safety standards system. Respiratory protective devices. Filtering half masks to protect against particles. General specifications
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31814-2012: Conformity assessment. General sampling rules for products testing during attestation assessment
GOST 31893-2012: Conformity assessment. Standards System in Conformity Assessment
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 6456-82: Abrasive paper
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8736-2014: Sand for construction works. Specifications
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R ISO 14040-2010: Environmental management. Life cycle assessment. Principles and framework
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
GOST R ISO 8501-1-2014: Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 1. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
SP 122.13330.2012: Railway and highway tunnels
SP 131.13330.2012: Building climatology
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 28.13330.2017: Protection against corrosion of construction
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 46.13330.2012: Bridges and pipes
SP 48.13330.2011: Organization of construction
SP 52.13330.2016: Daylighting and artificial lighting
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 78.13330.2012: Automobile roads
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.