PNST 164-2016
ПНСТ 164-2016
|
|
Electric equipment for nuclear power plants. General technical requirements
Электрооборудование для атомных станций. Общие технические требования
Status: Not effective - Expired
This standard applies to electrical equipment for nuclear power plants: high-voltage transformer bushings from 6 to 750 kV, power transformers (including dry transformers 6-10 / 0.4 kV), equipment for complete switchgears, equipment for open switchgears, low-voltage equipment up to 1 kV (including DC boards), uninterruptible power supply units (batteries, rectifiers, inverters, thyristor switching devices) and establishes general technical requirements general requirements for the classification, raw materials, materials, purchased items, completeness, packaging, safety, metrological support, acceptance rules and methods of control, transportation and storage, as well as warranty requirements for this electrical equipment. This standard does not apply to generators, diesel generator sets and their components, electric motors, the requirements for which are determined by separate standards.
Настоящий стандарт распространяется на электрооборудование для атомных станций: высоковольтные трансформаторные вводы от 6 до 750 кВ, силовые трансформаторы (в том числе сухие трансформаторы 6-10/0,4 кВ), оборудование комплектных распределительных устройств, оборудование открытых распределительных устройств, низковольтное оборудование до 1 кВ (в том числе щиты постоянного тока), агрегаты бесперебойного питания (аккумуляторные батареи, выпрямители, инверторы, тиристорные коммутационные устройства) и устанавливает общие технические требования к данному электрооборудованию, общие требования к классификации, сырью, материалам, покупным изделиям, комплектности, упаковке, безопасности, метрологическому обеспечению, правилам приемки и методам контроля, транспортированию и хранению, а также гарантийные требования к данному электрооборудованию. Настоящий стандарт не распространяется на генераторы, дизель-генераторные установки и их составные части, электродвигатели, требования к которым определяются отдельными стандартами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/25/2016
SKU: RUSS303963
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
The Document References:
Federal Law 170-FZ: On technical inspection of vehicles and on amendments to certain legislative acts of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 412-FZ: On accreditation in the national accreditation system
GOST 10121-76: Selectively purified transformer oil
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more
GOST 11677-85: Power transformers
GOST 11920-85: General purpose oil-immersed power transformers rated for voltage up to 35 kv inclusively
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12.2.024-87: Noise. Power oil-immersed transformers.
GOST 12965-85: General purpose oil-immersed power transformers rated for voltages 110 and 150 kv
GOST 14192-96: Cargo marking
GOST 14209-97: Loading guide for oil-immersed power transformers
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14255-69: Electrical apparatus for voltage to 1000 V. Shells. Degrees of protection
GOST 14693-90: Unsealed metal-enclosed switchgear
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv
GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16772-77: Converter transformers and reactors. General specifications
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 17544-85: General purpose power oil transformers of voltage classes 220, 330, 500 and 750 kv
GOST 18142.1-85: Semiconductor power rectifiers of 5 plus kw capacity
GOST 18311-80: Electrical products. Terms and definitions of basic concepts
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 18620-86: Electrotechnical articles
GOST 1983-2015: Voltage transformers. General specifications
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.602-2013: Unified system for design documentation. Repair documents
GOST 20243-74: Power transformers. Methods of short-circuit tests
GOST 20859.1-89: Power semiconductor devices
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development
GOST 23865-79: Condenser sealed bushings for nominal voltages 110 kW and higher. Types and sizes
GOST 24126-80: Power transformer on-load tap-changing devices. General specifications
GOST 24376-91: Semiconductor inverters
GOST 24683-81: Electrotechnical products. Methods of controlling resistance to attack by special media
GOST 26291-84: Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
GOST 26416-85: Uninterrupted power supply units for voltage to 1 kV. General specifications
GOST 26881-86: Stationary leaden batteries
GOST 27.002-2015: Dependability in technics. Terms and definitions
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements
GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts
GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 30631-99: General requirements for machines, instruments and other industrial products as to environment mechanical stability
GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems
GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications
GOST 6697-83: Power supply systems, sources, converters and receivers of electric alternating current energy rated frequencies from 0,1 to 10000 Hz and tolerances
GOST 6827-76: Electrical equipment and receivers of electric energy. Series of nominal currents
GOST 721-77: Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V
GOST 7746-2015: Current transformers. General specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST EN 50274-2012: Low-voltage switchgear and control gear assemblies. Protection against electric shock. Protection against unintentional direct contact to hazardous live parts
GOST IEC 61140-2012: Protection against electric shock. Common aspects for installation and equipment
GOST R 1.9-2004: Standardization in the Russian Federation. Mark of conformity to national standards of the Russian Federation. Representation. Application order
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 52719-2007: Power transformers. General specifications
GOST R 52725-2007: Surge arresters for a.c. electrical installations for voltage from 3 kV to 750kV. General specifications
GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 54827-2011: Dry-type transformers. General specifications
GOST R 55187-2012: Insulated bushings for alternating current rated voltages above 1000 V. Common specifications
GOST R 55190-2012: Metal-enclosed switchgear for rated voltages up to and including 35 kV. General specifications
GOST R 8.565-2014: State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations. General principles
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
MI 2439-97: National system for measurements unification. The measuring system metrological characteristics. Notation. The principles of regulation, definition and control.
PUE 204: Electrical Installation Rules (PUE). Chapter 7.5 Electrothermal Installations (Seventh Edition)
RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation
Technical regulations of the Customs Union TR TS 004/2011: About the safety of low voltage equipment
The Document is Referenced By:
RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.
RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
